Makita EE2650H Instruction Manual download pdf (Page 15)

CAUTION: Before doing any work on the petrol edger, always stop the engine and pull the plug cap off the spark plug (see “checking the spark

plug”).

Always wear protective gloves!

To ensure a long service life and to avoid any damage to the equipment, the following servicing operations should be performed at regular

intervals.

Daily checkup and maintenance

Before operation, check the machine for loose screws or missing parts. Pay particular attention to the tightness of the cutter blade or nylon –

cutting head.

Before operation, always check for clogging of the cooling air passage and the cylinder ﬁns. –

Clean them if necessary.

Perform the following work daily after use: –

• Clean the petrol edger externally and inspect for damage.

• Clean the air ﬁlter. When working under extremely dusty conditions, clean the ﬁlter the severall times a day.

• Check the blade or the nylon cutting head for damage and make sure it is ﬁrmly mounted.

• Check that there is sufﬁcient difference between idling and engagement speed to ensure that the cutting tool is at a standstill while the

engine is idling (if necessary reduce idling speed).

If under idling conditions the tool should still continue to run, consult your nearest Authorized Service Agent.

Check the functioning of the I-O switch, the lock-off lever, the control lever, and the lock button. –

SERVICING INSTRUCTIONS

REPLACEMENT OF ENGINE OIL

Deteriorated engine oil will shorten the life of the sliding and rotating parts to a great extent. Be sure to check the period and quantity of

replacement.

ATTENTION: In general, the engine main unit and engine oil still remain hot just after the engine is stopped. In replacement of oil,

conﬁrm that the engine main unit and engine oil are sufﬁciently cooled down. Otherwise, there may remain a risk of

scald.

Note: If the oil ﬁlled above the limit, it may be contaminated or may catch ﬁre with white smoke.

Interval of replacement: Initially, after 20 operating hours, and subsequently every 50 operating hours

Recommended oil: SAE10W-30 oil of API Classiﬁcation SF Class or higher (4-stroke engine oil for automobile)

In replacement, perform the following procedure.

1) Conﬁrm that the fuel tank cap (1) is tightened securely.

2) Place large container (pan, etc.) under drain hole (3).

(1)

(2)

3) Remove drain bolt (5) and then remove oil cap (2) to drain out oil from drain

hole.

At this time, be sure not to mislay drain bolt’s gasket (4), or to dirty any of

the removed components.

4) Once all the oil has been drained, combine gasket and drain bolt, and tightly

secure drain bolt, so that it will not loosen and cause leaks.

* Use cloth to fully wipe off any oil attached to bolt and equipment.

(5)

(4)

(3)

Alternative draining method

Remove oil cap, tilt petrol edger toward oil ﬁller hole, and drain out oil.

Collect oil in container.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 191 192

Comments to this Manuals

No comments

Makita EE2650H Instruction Manual Page 15

Comments to this Manuals

Related products and manuals for Garden tools Makita EE2650H