Makita EE2650H Instruction Manual download pdf (Page 14)

ADJUSTMENT OF LOW-SPEED ROTATION (IDLING)

When it is necessary to adjust the low-speed rotation (idling), perform it by the carburetor adjusting screw (1).

CHECKUP OF LOW-SPEED ROTATION

Set the low-speed rotation to 3,000 min –

-1

If it is necessary to change the rotation speed, regulate the adjusting screw,

with Phillips screwdriver.

Turn the adjusting screw to the right, and the engine rotation will increase. –

Turn the adjusting screw to the left, and the engine rotation will drop.

The carburetor is generally adjusted before shipment. If it is necessary to –

readjust it, please contact Authorized Service Center.

(1)

STOPPING

1) Release the throttle lever (2) fully, and when the engine rpm has lowered,

set the I-O switch (1) to STOP the engine will now stop.

2) Be aware that the cutting head may not stop immediately and allow it to

slow down fully.

OPERATION OF THROTTLE LEVER

The handle equips with lock-off lever (1) to prevent accidental start. To pull the

throttle lever (2), grasp the handle to release the lock (the lock-off button is

pressed by hand pressure).

The engine rotation increases when you pull the throttle. The engine runs idle

when you release the throttle lever.

(1)

(2)

STOP

(1)

(2)

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 191 192

No comments

Makita EE2650H Instruction Manual Page 14