Makita DPC7001 Owner's Manual download pdf (Page 5)

Always

wearsafetyshoesor boots

(G)

with steel toes, non-skid

soles, and leg protectors when working with the Power Cut.

Safety shoes equipped with a protective layer provide protection

against cuts and ensure a secure footing.

Always wear a

work suit

(H)

of sturdy material.

Fuels

Refuelling

to a safe place before refuelling.

Never refuel while on

scaffolding, on heaps of material, or in similar places!

Stop the engine before refuelling the Power Cut.

not smoke or work near open fires

(6).

Let the engine cool down before refuelling.

Fuels can contain substances similar to solvents. Eyes and skin

should not come in contact with mineral oil products. Always wear

protective gloves when refuelling (not the regularworkgloves!).

Frequently clean and change protective clothes.

not breathe

in fuel vapors.

not spill fuel.

a spill occurs, clean off the Power Cut

immediately. Fuel should not come in contact with clothes. If your

clothes have come in contact with fuel, change them at once.

Ensurethat no fuel or chain oil oozes intothesoil (environmental

protection). Use an appropriate base.

Refuelling is not allowed in closed rooms. Fuel vapors will

accumulate near the floor (explosion hazard).

Ensure to firmly tighten the screw plug

the fuel tank

Before starting the engine, move to a location at least

feet

meters) from where you fuelled the Power Cut

(7),

but not within

the extended swing range of the cutting disc (direction of sparks)

Fuel cannot be stored for an unlimited period of time. Buy only as

much as will be consumed in the near future

When making up the gasolineloil mixture, always put the oil in the

mixing container

flrst,

and then the gasoline.

Use only approved and marked containers for the transport and

storage of fuel.

Keep fuel away from children!

Putting into operation

not work on your own. There must be someone around in

case of an emergency.

Observe all anti-noise regulations when working in residential

areas.

Never use the Power Cut near inflammable materials or

explosive gases! The Power Cut can create sparks leading to

fire or explosion!

Make sure that all persons within

100

feet

(30

meters), such as

other workers, are wearing protective gear (see "Protective

Equipment")

(8).

Children and other unauthorized persons must

remain more than

100

feet away from the working area. Keep an

eye out for animals as well

(9).

Before starting work the Power Cut must be checked for

perfect function and operating safety according to the

prescriptions.

In particular the condition of the cutting disc (cracked, damaged,

or bent cutting discs must be replaced immediately), proper

mounting of the cutting disc, proper mounting of

the V-belt

guard,

correct V-belt tension, ease of motion of the throttle lever and

functioning of the throttle lever lock, clean and dry handles, and

functioning of the onloff switch.

Put the Power Cut only into operation

it is completely assem-

bled. Never use the Power Cut when it is not completely

assem bled.

feet

meters)

lOOfeet

(30

meters)

__-_--

I---

;

wearingprotective

Equipment

- -

1 2 3 4 5 6 7 8 9 10 ... 51 52

Comments to this Manuals

No comments

Makita DPC7001 Owner's Manual Page 5

Comments to this Manuals