Makita DPC7001 Owner's Manual download pdf (Page 23)

Instructions

for

periodic maintenance

To ensure a long servicelife and to prevent any damage the maintenance work described in the following must be performed regularly.

The product guarantee will be automatically invalidated

this maintenance is not carried out regularly and according to the instructions.

Users of the Power Cut must not perform any maintenance work not described in this Owner’s Manual. All such work must be carried

out

by a MAKITA service centre.

Genera

Before each start

Every day

Every week

Every

months

Storage

Entire Power Cut

Cutting disc

Clutch

Protection hood

Cutting disc

V-belt

OFF switch,

Safety locking button,

Throttle lever

Fuel tank plug

Air filter

Idle speed

Fan housing

Starter cable

V-belt

Spark plug

Muffler

Suction head

Fuel tank

Entire Power Cut

Cutting disc

Fuel tank

Carburetor

~~ ~

Clean exterior, check for damage. In case of damage,

have repaired by a qualified service centre immediately

Inspect regularly for damage and wear.

Have inspected at a service center.

Clean

Check for damage

CheckV-belt tension

(note: tension gauge must be purchased separately)

Functional check

Check for tightness

Clean

Check (cutting disc must not turn on idle)

Clean to ensure proper air cooling

Checkfordamage

Check V-belt tension, inspect for damage and wear

Check and replace if necessary

Check tightness

mounting

Replace

Clean

Clean exterior, check for damage. In case of damage,

have repaired by a qualified service centre immediately

Remove and clean

Empty and clean

Run empty

Page

Service, spare parts and guarantee

Maintenance and repair

The maintenance and repair of modern cutoff saws and their safety-related components requires qualified technical training and a

workshop equipped with special tools and testing devices.

We therefore recommend that you consult a MAKITA service centre for all work not described in this owner’s manual.

The MAKITA service centres have all the necessary equipment and skilled and experienced personnel, who can work out cost-effective

solutions and advise you in all matters.

Please contact your nearest service centre. Should you however not have an adress for a MAKITA service centre then please contact

the MAKITA general trading company (see last page), who will gladly provide you with the address of your nearest MAKITA service

centre.

Spare parts

Reliable long-term operation, as well as the safety of your Power Cut, depend among other things on the quality of the spare parts used.

Use only original MAKITA parts, marked

/‘n

‘/HA

Only original spare parts and accessories guarantee the highest quality in material, dimensions and function.

Original spare parts and accessories can be obtained from your local dealer. He will also have the spare part lists

determine the

required spare part numbers, and will be constantly informed about the latest improvements and spare part innovations.

Please bear in mind that

parts other than original MAKITA spare parts are used, this will automatically invalidate the MAKITA product

guarantee.

We will furthermore not accept any liability damages arising from the use of non-MAKITA spare parts.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 51 52

Comments to this Manuals

No comments

Makita DPC7001 Owner's Manual Page 23

Comments to this Manuals