Makita LS1211 Instruction Manual download pdf (Page 24)

ii) 45" bevel angle

Adjust

the

45" bevle angle only after

performing

bevel angle adjustment.

To adjust left 45" bevel angle, loosen

the lever and tilt the blade 45" to the

left.

Make

sure that the pointer on the

arm points to 45" on the bevel scale

on the arm. If the pointer does not

point to 45". turn the hex bolt (€3) on

the

side

the

turn base until the

pointer points to 45".

adjusr right 45" bevel angle, per-

form the same procedure described

above.

Right

45"

Left

45"

bevel angle

adjusting

bolt

bevel angl

adjusting

bolt

Adjusting

for

smooth

handle

action

The hex lock nut which holds the blade case

and the arm together has been factory adjust-

ed to assure smooth handle action up and

down and to guarantee precise cutting.

not tamper it. Should looseness develop at

the blade case and arm connection, tighten

the hex lock nut using

wrench while holding

the bolt with another wrench. After adjusting

the hex lock nut, be sure that the handle

returns automatically to the initial, raised

position from any position.

the hex lock nut

is too loose, the cutting accuracy will be

affected; if it is too tight, it

will

be difficult to work the handle up and down. Note that this

self locking nut. It is a special type that does not loosen during normal use. It should not be

overtightened or replaced with other types of nuts. The ideal amount to tighten the hex lock

nut is: tight enough to just barely prevent any bining

the handle action when the handle is

moved up or down.

Replacing carbon brushes

Remove and check the carbon brushes

regularly. Replace when they wear down to

the limit mark. Keep the carbon brushes

clean

and

free to slip in the holders. Both

carbon brushes should be replaced at the

same time. Use only indentical carbon

brushes.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 30

Comments to this Manuals

Joe Finley 21 Jan 2024 | 19:04:28

Chsnge blade

Makita LS1211 Instruction Manual Page 24

Comments to this Manuals

Related products and manuals for Mitre saws Makita LS1211