Makita LS1211 Instruction Manual download pdf (Page 9)

Positioning

kerf

boards

This tool

provided with kerf boards in the turn base. The kerf boards are factory-adjusted

that the saw blade does not contact the kerf boards. Before use, adjust the kerf boards

follows:

First unplug the tool. Loosen the

all

screws

each on left and right) which secure the

kerf boards. Retighten them to the extent

that the

kerf boards can be easily moved by

hand. Loosen the clamp screw on the arm.

Pull the carriage toward

you

fully and

lower the handle

fully.

Adjust the kerf

boards

that the kerf boards just contact

the sides of blade teeth slightly. Tighten

the front screws (do not tighten firmly).

Push the carriage toward the guide fence

fully and adjust the kerf boards

that the

kerf boards just contact the sides of blade teeth slightly. Tighten the rear screws (do not

tighten firmly). After adjusting the kerf boards, tighten the

all

screws securely.

Kerf

board

Left

bevel

cut

Straight

cut

Right

bevel

cut

CAUTION:

After changing the bevel angle, always readjust the kerf boards

described above.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 29 30

Comments to this Manuals

Joe Finley 21 Jan 2024 | 19:04:28

Chsnge blade

Makita LS1211 Instruction Manual Page 9

Comments to this Manuals

Related products and manuals for Mitre saws Makita LS1211