Makita EBH341U Instruction Manual Page 14
- Page / 232
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
14
Attachment of shoulder strap
– Adjust the strap length so that the cutter blade will be
kept parallel with the ground.
For EBH341U
NOTE: Be careful not to trap clothing, etc., in the buckle.
Observe the applicable accident prevention regulations!
STARTING
Move at least 3 m away from the place of refuelling. Place the Petrol Brushcutter on a clean piece of ground taking care that the cutting tool
does not come into contact with the ground or any other objects.
A: Cold start
1) Set this machine on a flat space.
(1)
OPERATION
Lock-off lever
High speed
Low speed
Throttle lever
CORRECT HANDLING OF MACHINE
POINTS IN OPERATION AND HOW TO STOP
2) Set the I-O switch (1) to OPERATION.
3) Choke lever
Close the choke lever.
Choke opening:
– Full closing in cold or when the engine is cold.
– Full or half opening in restart just after stop of operation.
CLOSE
STOP
EBH341UEBH341L
OPERATION
STOP
(1)
Low speed
High speed
Detachment
For EBH341L
– In an emergency, push the notches (1) at both sides, and you can detach the
machine from you.
Be extremely careful to maintain control of the machine at this time. Do not
allow the machine to be deflected toward you or anyone in the work vicinity.
WARNING: Failure to maintain complete control of the machine at all could
result in serious bodily injury or DEATH.
(2)
Hanger
(1)
For EBH341U
– In an emergency, push the notches (2) at both sides, and
you can detach the machine from you.
Be extremely careful to maintain control of the machine
at this time. Do not allow the machine to be deflected
toward you or anyone in the work vicinity.
WARNING: Failure to maintain complete control of the
machine at all could result in serious bodily
injury or DEATH.
Buckle
EBH341U
Throttle lever
- EBH341LEBH341U 1
- (Original instructions) 2
- SAFETY INSTRUCTIONS 3
- Refueling 4
- DESIGNATION OF PARTS 8
- MOUNTING OF HANDLE 9
- MOUNTING OF PROTECTOR 10
- Mounting of cutterblade 11
- BEFORE START OF OPERATION 12
- REFUELING 13
- Handling of fuel 13
- Storage period of fuel 13
- CORRECT HANDLING OF MACHINE 14
- Caution during operation: 15
- STOPPING 15
- RESHARPENING THE CUTTING TOOL 16
- Replacing the nylon cord 17
- SERVICING INSTRUCTIONS 18
- POINTS ON OIL 19
- CLEANING OF AIR CLEANER 20
- CHECKING THE SPARK PLUG 20
- SUPPLY OF GREASE TO GEAR CASE 20
- Fault location 22
- TROUBLESHOOTING 24
- Français 25
- CONSIGNES DE SÉCURITÉ 26
- Ravitaillement en carburant 27
- NOMENCLATURE DES PIÈCES 31
- MONTAGE DE LA POIGNÉE 32
- Montage du couteau 34
- AVANT DE COMMENCER 35
- FAIRE LE PLEIN D’ESSENCE 36
- Maniement de l’essence 36
- Carburant 36
- Attachement du harnais 37
- DÉMARRAGE 37
- A : Démarrage à froid 37
- Détachement 37
- RÉAFFÛTAGE DU COUTEAU 39
- Remplacement du fil en nylon 40
- INSTRUCTIONS D’ENTRETIEN 41
- ENTREPOSAGE 45
- RÉSOLUTION DE PROBLÈMES 47
- (Originalanweisungen) 48
- SICHERHEITSVORSCHRIFTEN 49
- Auftanken 50
- kg 7,1 6,7 53
- BEZEICHNUNG DER BAUTEILE 54
- MONTIEREN DES GRIFFS 55
- MONTIEREN DES SCHUTZES 56
- Montieren der Schneidklinge 57
- VOR DEM BETRIEB 58
- AUFTANKEN 59
- Umgang mit dem Kraftstoff 59
- Kraftstoff 59
- A: Kaltstart 60
- Befestigen des Schultergurtes 60
- Achtung bei Betrieb 61
- SCHÄRFEN DES SCHNEIDWERKZEUGS 62
- Ersetzen des Nylonseils 63
- WARTUNGSANWEISUNGEN 64
- WICHTIGE PUNKTE ZUM ÖL 65
- LAGERUNG 68
- FEHLERSUCHE 70
- Italiano 71
- ISTRUZIONI DI SICUREZZA 72
- Rifornimento 73
- DESIGNAZIONE DELLE PARTI 77
- MONTAGGIO DELL’IMPUGNATURA 78
- MONTAGGIO DELLA PROTEZIONE 79
- PRIMA DELLA MESSA IN FUNZIONE 81
- RIFORNIMENTO 82
- Trattamento del carburante 82
- Carburante 82
- FUNZIONAMENTO E ARRESTO 83
- Precauzioni durante l’uso: 84
- Sostituzione del filo di nylon 86
- ISTRUZIONI DI MANUTENZIONE 87
- INDICAZIONI UTILI SULL’OLIO 88
- CONSERVAZIONE 91
- RISOLUZIONE DEI PROBLEMI 93
- Nederlands 94
- VEILIGHEIDSINSTRUCTIES 95
- Brandstof bijvullen 96
- NAMEN VAN ONDERDELEN 100
- DE HANDGREEP MONTEREN 101
- DE BESCHERMKAP MONTEREN 102
- HET SNIJGARNITUUR MONTEREN 103
- VÓÓR HET BEGIN VAN HET WERK 104
- Opslagtermijn van brandstof 105
- Brandstof 105
- BRANDSTOF BIJVULLEN 105
- Omgaan met brandstof 105
- CORRECTE HANTERING 106
- Opgelet tijdens gebruik: 107
- HET SNIJGARNITUUR SLIJPEN 108
- De nylondaad vervangen 109
- ONDERHOUDSINSTRUCTIES 110
- TIPS VOOR HET OMGAAN MET OLIE 111
- HET LUCHTFILTER REINIGEN 112
- DE BOUGIE CONTROLEREN 112
- HET TANDWIELHUIS SMEREN 112
- Storingzoeken 114
- PROBLEMEN OPLOSSEN 116
- SÍMBOLOS 117
- INSTRUCCIONES DE SEGURIDAD 118
- Repostaje 119
- DENOMINACIÓN DE LAS PIEZAS 123
- MONTAJE DEL ASIDERO 124
- MONTAJE DEL PROTECTOR 125
- ANTES DEL USO 127
- REPOSTAJE 128
- Manejo del combustible 128
- Combustible 128
- MANEJO CORRECTO DE LA MÁQUINA 129
- Atención a la operación 130
- Reemplazo del hilo de nylon 132
- INSTRUCCIONES DE SERVICIO 133
- ASPECTOS SOBRE EL ACEITE 134
- ALMACENAMIENTO 137
- Português 140
- INSTRUÇÕES DE SEGURANÇA 141
- Abastecimento 142
- Primeiros-socorros 144
- Declaração de conformidade CE 144
- DESIGNAÇÃO DE PEÇAS 146
- MONTAGEM DA PEGA 147
- MONTAGEM DO PROTECTOR 148
- Montagem da lâmina de corte 149
- ABASTECIMENTO 151
- Lidar com o combustível 151
- Combustível 151
- A: Arranque a frio 152
- Fixação da alça do ombro 152
- Separação 152
- Atenção no Funcionamento 153
- Substituir o fio de nylon 155
- INSTRUÇÕES DE SERVIÇO 156
- PONTOS SOBRE O ÓLEO 157
- ARMAZENAMENTO 160
- RESOLUÇÃO DE PROBLEMAS 162
- SYMBOLER 163
- SIKKERHEDSANVISNINGER 164
- Påfyldning af brændstof 165
- DELENES BETEGNELSER 169
- MONTERING AF HÅNDTAG 170
- MONTERING AF SKÆRM 171
- Montering af klinge 172
- INDEN ANVENDELSE 173
- PÅFYLDNING AF BRÆNDSTOF 174
- Håndtering af brændstof 174
- Brændstof 174
- A: Koldstart 175
- Montering af bærerem 175
- Aftagning 175
- B: Opstart efter opvarmning 176
- STOPPROCEDURE 176
- SLIBNING AF SKÆREVÆRKTØJET 177
- Udskiftning af nylonsnor 178
- VEDLIGEHOLDELSESINSTRUKTIONER 179
- PUNKTER VEDRØRENDE OLIE 180
- RENGØRING AF LUFTFILTER 181
- KONTROL AF TÆNDRØRET 181
- OPBEVARING 183
- FEJLFINDING 185
- Ελληνικά 186
- ΟΔΗΓΙΕΣ ΑΣΦΑΛΕΙΑΣ 187
- Ανεφοδιασμός 188
- ΚΑΘΟΡΙΣΜΟΣ ΕΞΑΡΤΗΜΑΤΩΝ 192
- ΣΤΕΡΕΩΣΗ ΤΟΥ ΧΕΡΟΥΛΙΟΥ 193
- ΣΤΕΡΕΩΣΗ ΤΟΥ ΠΡΟΦΥΛΑΚΤΗΡΑ 194
- Στερέωση της λάμας κοπής 195
- Πάνω όριο της στάθμης λαδιού 196
- (Χαμηλότερο τμήμα της τρύπας 196
- ΑΝΕΦΟΔΙΑΣΜΟΣ 197
- Χειρισμός καυσίμου 197
- ΞΕΚΙΝΗΜΑ 198
- A: Εκκίνηση εν ψυχρώ 198
- Αποσύνδεση 198
- Προσοχή κατά τη λειτουργία: 199
- ΣΤΑΜΑΤΗΜΑ 199
- ΑΚΟΝΙΣΜΑ ΤΟΥ ΕΡΓΑΛΕΙΟΥ ΚΟΠΗΣ 200
- ΟΔΗΓΙΕΣ ΣΕΡΒΙΣ 202
- ΣΗΜΕΙΩΣΕΙΣ ΓΙΑ ΤΟ ΛΑΔΙ 203
- ΑΠΟΘΗΚΕΥΣΗ 206
- ΕΠΙΛΥΣΗ ΠΡΟΒΛΗΜΑΤΩΝ 208
- SİMGELER 209
- GÜVENLİK TALİMATLARI 210
- Yakıt doldurma 211
- PARÇALARIN GÖSTERİMİ 215
- SAPIN TAKILMASI 216
- KORUYUCUNUN TAKILMASI 217
- Kesici bıçağın takılması 218
- ÇALIŞMAYA BAŞLAMADAN ÖNCE 219
- YAKIT DOLDURMA 220
- Yakıtın taşınması 220
- Yakıt depolama süresi 220
- Omuz askısının takılması 221
- ÇALIŞTIRMA 221
- A: Soğuk çalıştırma 221
- Makinenin çıkartılması 221
- DURDURMA 222
- KESİCİ PARÇANIN BİLENMESİ 223
- Misinanın değiştirilmesi 224
- SERVİS TALİMATLARI 225
- YAĞLA İLGİLİ UYARILAR 226
- BUJİNİN KONTROLÜ 227
- DİŞLİ KUTUSUNUN DOLDURULMASI 227
- Arıza tespiti 229
- SORUN GİDERME 231
- Makita Corporation 232
Related products and manuals for Garden tools Makita EBH341U
(37 pages)
Garden tools Makita BUB360 User Manual
(8 pages)
(8 pages)
Garden tools Makita MU01 User Manual
(17 pages)
(17 pages)
Garden tools Makita BUB360 User Manual
(44 pages)
(44 pages)
Garden tools Makita EK7650H Instruction Manual
(104 pages)
(104 pages)
Garden tools Makita UB360D User Manual
(44 pages)
(44 pages)
Garden tools Makita EM2650LH User Manual
(26 pages)
(26 pages)
Garden tools Makita BUB360 User Manual
(20 pages)
(20 pages)
© 2020, manymanuals.com. All rights reserved. | 0.587 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals