Makita 6213D Specifications download pdf (Page 12)

When not using the driver bit, keep it in the bit holders. Bits

45 mm (1-3/4”) long can be kept there.

OPERATION

Screwdriving operation

Place the point of the driver bit in the screw head and apply

pressure to the tool. Start the tool slowly and then increase

the speed gradually. Release the switch trigger as soon as

the clutch cuts in.

NOTE:

• Make sure that the driver bit is inserted straight in the

screw head, or the screw and/or bit may be damaged.

• When driving wood screws, predrill pilot holes to make

driving easier and to prevent splitting of the workpiece.

See the chart.

• If the tool is operated continuously until the battery

cartridge has discharged, allow the tool to rest for 15

minutes before proceeding with a fresh battery.

1. Bit

2. Bit holder

002114

002132

Nominal diameter of

wood screw (mm)

3.1 (1/8”)

3.5 (9/64”)

3.8 (5/32”)

4.5 (11/64”)

4.8 (3/16”)

5.1 (13/64”)

5.5 (7/32”)

5.8 (7/32”)

6.1 (15/64”)

Recommended size

of pilot hole (mm)

2.0 - 2.2 (5/64” - 3/32”)

2.2 - 2.5 (3/32” - 3/32”)

2.5 - 2.8 (3/32” - 7/64”)

2.9 - 3.2 (7/64” - 1/8”)

3.1 - 3.4 (1/8” - 9/64”)

3.3 - 3.6 (1/8” - 9/64”)

3.7 - 3.9 (9/64” - 5/32”)

4.0 - 4.2 (5/32” - 11/64”)

4.2 - 4.4 (11/64” - 11/64”)

1 ... 11 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments

Makita 6213D Specifications Page 12

Comments to this Manuals

Related products and manuals for Power drills Makita 6213D