Makita 6213D Specifications download pdf (Page 10)

Switch action

CAUTION:

• Before inserting the battery cartridge into the tool,

always check to see that the switch trigger actuates

properly and returns to the “OFF” position when

released.

To start the tool, simply pull the switch trigger. Tool speed is

increased by increasing pressure on the switch trigger.

Release the switch trigger to stop.

Electric brake

This tool is equipped with an electric brake. If the tool consis-

tently fails to quickly stop after switch trigger release, have

tool serviced at a Makita service center.

Reversing switch action

This tool has a reversing switch to change the direction of

rotation. Depress the reversing switch lever from the A side

for clockwise rotation or from the B side for counterclockwise

rotation.

When the reversing switch lever is in the neutral position, the

switch trigger cannot be pulled.

CAUTION:

• Always check the direction of rotation before operation.

• Use the reversing switch only after the tool comes to a

complete stop. Changing the direction of rotation before

the tool stops may damage the tool.

• When not operating the tool, always set the reversing

switch lever to the neutral position.

Speed change

To change the speed, first switch off the tool and then slide

the speed change lever to the “II” side for high speed or “I”

side for low speed. Be sure that the speed change lever is

set to the correct position before operation. Use the right

speed for your job.

1. Switch trigger

002075

1. Reversing switch lever

002086

1. Low speed

2. High speed

3. Speed change lever

002095

1 ... 9 10 11 ... 20

No comments

Makita 6213D Specifications Page 10