Makita DCS4610 Instruction Manual download pdf (Page 24)

Spare parts

Reliable long-term operation, as well as the safety of your chain saw, depend among other things on the quality of the spare parts

used. Use only original MAKITA parts, marked

Only original spare parts and accessories guarantee the highest quality in material, dimensions, functioning and safety.

Original spare parts and accessories can be obtained from your local dealer. He will also have the spare part lists to determine the

required spare part numbers, and will be constantly informed about the latest improvements and spare part innovations. To ﬁ nd your

local distributor, please visit www.makita-outdoor.com

Please bear in mind that if parts other than original MAKITA spare parts are used, this will automatically invalidate the MAKITA

product guarantee.

Guarantee

MAKITA guarantees the highest quality and will therefore reimburse all costs for repair by replacement of damaged parts resulting

from material or production faults occurring within the guarantee period after purchase. Please note that in some countries particular

guarantee conditions may exist. If you have any questions, please contact your salesman, who is responsible for the guarantee of

the product.

Please note that we cannot accept any responsibility for damage caused by:

• Disregard of the instruction manual.

• Non-performance of the required maintenance and cleaning.

• Incorrect carburetor adjustment.

• Normal wear and tear.

• Obvious overloading due to permanent exceeding of the upper performance limits.

• Use of guide bars and chains which have not been approved.

• Use of guide bar and chain lengths which have not been approved.

• Use of force, improper use, misuse or accidents.

• Damage from overheating due to dirt on the fan housing.

• Work on the chain saw by unskilled persons or inappropriate repairs.

• Use of unsuitable spare parts or parts which are not original MAKITA parts, insofar as they have caused the damage.

• Use of unsuitable or old oil.

• Damage related to conditions arising from lease or rent contracts.

• Damages caused by disregarding loose outer bolted connections.

Cleaning, servicing and adjustment work is not covered by the guarantee. All repairs covered by the guarantee must be performed

by a MAKITA service centre.

Malfunction System Observation Cause

Chain does not run Chain brake Engine runs Chain brake actuated.

Engine does not start or Ignition system Ignition spark Malfunction in fuel supply system, com-

only with difﬁ culty pression system, mechanical malfunction.

No ignition spark Switch on STOP, fault or short-circuit in the

wiring, plug cap or spark plug defective.

Fuel supply Fuel tank is ﬁ lled Choke in wrong position, carburetor defective,

suction head dirty, fuel line bent or interrupted.

Compression Inside Cylinder base packing ring defective, radial

system shaft packings defective, cylinder or piston

rings defective

Outside Spark plug does not seal.

Mechanical Starter does not engage Spring in starter broken, broken parts

malfunction inside the engine.

Warm start difﬁ culties Carburetor Fuel tank is ﬁ lled Wrong carburetor adjustment.

Ignition spark

Engine starts, but Fuel supply Fuel tank is ﬁ lled Wrong idling adjustment, suction head or

dies immediately carburetor dirty. Tank venting defective, fuel

line interrupted, cable defective, combination

switch defective.

Insufﬁ cient power Several systems Engine is idling Air ﬁ lter dirty, wrong carburetor adjustment,

may be involved mufﬂ er clogged,exhaust channel in cylinder

simultaneously clogged.

No chain lubrication Oil tank/pump No oil on the chain Oil tank empty.

Oil guide groove dirty.

Troubleshooting

1 2 ... 19 20 21 22 23 24 25 26 27 28

Comments to this Manuals

No comments

Makita DCS4610 Instruction Manual Page 24

Comments to this Manuals

Related products and manuals for Power chainsaws Makita DCS4610