Instruction ManualImportant:Read this instruction manual carefully before putting the chain saw into operation and strictly observe the safety regulat
10Chain brakeThe DCS230T and DCS232T come with an inertia chain brake as standard equipment. If kick-back occurs due to contact of the guide-bar tip w
11Chain oilUse an oil with adhesive additive for lubricating the chain and guide bar. The adhesive additive prevents the oil from being flungoff the c
12To ensure troublefree operation of the oil pump the oil guide groove at the housing (2) and the oilinlet bore in the guide bar (3) must be cleaned r
13Checking the chain brakeDo not work with the chain saw without first checking the chain brake!Start the engine as described (make sure you have a go
14All cutters must be sharpened to the same angle, 30°. Different angles result in a roughly, irregu-larly running chain, increase wear and tear and c
15Cleaning the guide bar, lubricating the sprocket noseCAUTION: Protective gloves must be worn.Regularly inspect the bearing surfaces of the guide bar
16Electrode gapThe electrode gap must be 0.6 – 0.7 mm.Cleaning the inlet port of the cooling airUnscrew four screws (2). Remove recoil starter (3). Cl
17Instructions for periodic maintenanceTo ensure long life, prevent damage and ensure the full functioning of the safety features the following mainte
18GuaranteeMAKITA guarantees the highest quality and will therefore reimburse all costs for repair by replacement of damaged parts resulting from mate
19
2Thank you for purchasing a MAKITA product!Congratulations on choosing a MAKITA chain saw! We are confident thatyou will be satisfied with this modern
Makita CorporationAnjo Aichi Japan884570A5
3SymbolsYou will notice the following symbols on the chain saw and in the instruction manual:Read instruction manual and follow the warning- and safet
4SAFETY PRECAUTIONSCAUTION:This chain saw is designed especially for tree care and surgery. All work with this chain saw is to be carriedout by proper
5Before starting work the chain saw must be checked for perfect function and operating safety accordingto the prescriptions.Check especially the funct
6- The saw must be running whenever you remove the chain saw from the wood.- When performing several cuts the throttle lever must be released in betwe
7First aidFor the event of a possible accident, please make sure that a first aid kit is always immediately available close by.Immediately replace any
8Denomination of components1 Rear handle2 Safety locking button (throttle lock)3 Throttle lever4 Hand guard (release for chain brake)5 Chain6 Guide ba
9Position the guide bar (7). Lift the chain (9) over the sprocket (10). Using your right hand, guide the chain into the top guidegroove (11) on the gu
Comments to this Manuals