Makita DCS4610 Instruction Manual download pdf (Page 23)

Instructions for periodic maintenance

To ensure long life, prevent damage and ensure the full functioning of the safety features the following maintenance must be performed

regularly. Guarantee claims can be recognized only if this work is performed regularly and properly. Failure to perform the prescribed

maintenance work can lead to accidents!

The user of the chain saw must not perform maintenance work which is not described in the instruction manual. All such work must

be carried out by a MAKITA service centre.

Page

General Chain saw Clean exterior, check for damage. In case of damage,

have repaired by a qualiﬁ ed service centre immediately

Saw chain Sharpen regulary, replace in good time 18-19

Chain brake Have inspected regularly at an authorized service centre

Guide bar Turn over to ensure even wear of bearing surfaces

Replace in good time 12, 20

Starter cable Check for damage. In case of damage,

have repaired by a qualiﬁ ed service centre immediately

Before each start Saw chain Inspect for damage and sharpness 18-19

Check chain tension 12

Guide bar Check for damage

Chain lubrication Functional check 15

Chain brake Functional check 17

Combination switch,

Safety locking button,

Throttle lever Functional check 16

Fuel/oil tank cap Check for tightness

Every day Air ﬁ lter Clean 21

Guide bar Check for damage, clean oil intake bore 20

Guide bar support Clean, in particular the oil guide groove 15, 20

Idle speed Check (chain must not run) 17

Every week Fan housing Clean to ensure proper air cooling 9

Spark plug Check and replace if necessary

Mufﬂ er Check tightness of mounting 9

Chain catch Check 11

Screws and nuts Check their condition and that they are ﬁ rmly secured.

Every 3 months Suction head Replace 21

Fuel, oil tanks Clean

Annually Chain saw Check at an authorized service centre

Storage Chain saw Clean exterior, check for damage. In case of damage,

have repaired by a qualiﬁ ed service centre immediately

Chain, guide bar Demount, clean and oil slightly

Clean the guide groove of the guide bar 20

Fuel, oil tanks Empty and clean

Carburetor Run empty

Service, spare parts and guarantee

Maintenance and repair

The maintenance and repair of modern engines as well as all safety devices require qualiﬁ ed technical training and a special work-

shop equipped with special tools and testing devices.

We therefore recommend that you consult a MAKITA service centre for all work not described in this instruction manual. The MAKITA

service centres have all the necessary equipment and skilled and experienced personnel, who can work out cost-effective solutions

and advise you in all matters.

To ﬁ nd your local distributor, please visit www.makita-outdoor.com

1 2 ... 18 19 20 21 22 23 24 25 26 27 28

Comments to this Manuals

No comments

Makita DCS4610 Instruction Manual Page 23

Comments to this Manuals

Related products and manuals for Power chainsaws Makita DCS4610