P 30 / 45
5 - 3 - 15 Insulator and carburetor insulator
Cover insulator with carburetor insulator and fasten
them together, with screw M5 x 18 (2 pcs.).
The end face of the adjusting screw shall be
aligned with insulator end face (no protrusion).
The angular side of insulator gasket
shall face up.
The tightening torque
for screw M5 x 18 : 4 - 5.5 N.m
(40 - 55 Kg.cm)
(2.9 - 4.0 ft.lb.)
Insulator gasket
Insulator
Carburetor
insulator
Screw M5 x 18
with washer : 2 pcs.
Fig. 5 - 42
<Note>
Approx. 2mm
Adjusting screw has to be so adjusted
that its bottom face is aligned with the end
face of insulator gasket.
Adjusting screw
Fig. 5 - 43
Screw M5 x 10
Comments to this Manuals