Makita EM4251 Service Manual Page 35

  • Download
  • Add to my manuals
  • Print
  • Page
    / 48
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 34
P 32 / 45
Breather pipe
Hose clamp
Plate upper
part claw
Pipe
Tube
Tube
Fig. 5 - 46
(b) Install the fuel tank tube on the fuel joint of the carburetor.
(Be careful, not to bend the tube.)
(c) Install the return pipe on the pipe joint at the center of
cylinder.
(d) While turning breather pipe to the recoil starter side,
install it on pipe located on rocker cover and fasten
it with hose clamp.
(e) Install air cleaner cover after hooking it on the claw
located on air cleaner plate.
Fasten screw M5 x 14mm with washer : 1 pc.
The tightening torque
for screw M5 x 14 : 0.5 - 1 N.m
(5 - 10 Kg.cm)
(0.04 - 0.7 ft.lb.)
The tightening torque
for bolt M6 : 7.5 - 10 N.m
(75 - 100 Kg.cm)
(5.4 - 7.2 ft.lb.)
5 - 3 - 17 Spark plug
Install spark plug.
5 - 3 - 18 Clutch
Install clutch with facing the " " mark of clutch shoe
to the front side (assembly worker side).
fasten clutch with 2 pcs. of bolts M6.
Clutch
Spring
Bolt M6 : 2 pcs.
Fig. 5 - 47
Page view 34
1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 47 48

Comments to this Manuals

No comments