Makita EM4251 Service Manual download pdf (Page 16)

P 13 / 45

Air Cleaner, Insulator,

Insulator carburetor,

1) Remove air cleaner cover and element. See Fig.5-6.

1) Remove separator plate. See Fig. 5-6.

Separator plate has to be removed by holding its edge,

instead of square pipe portion. Otherwise, the square

pipe portion may be damaged. See Fig. 5-8.

3) Remove air cleaner plate, which is fastened

together with carburetor. See Fig. 5-6.

3) Remove check valve (A) from air cleaner plate.

See Fig. 5-6.

4) Remove insulator and carburetor insulator.

See Fig. 5-6.

2) Remove fuel tube from carburetor. And then remove

breather pipe and return pipe from cylinder.

See Fig. 5-7.

It is convenient to use a small-sized screwdriver to

facilitate the job. See Fig. 5-7.

2) Remove the check valve plate (fastened

together with the check valve) with a small-

sized screwdriver. It is recommended to pry

the hook of check valve plate with a screw-

driver to facilitate the removing work.

* Breather unit of the air cleaner

(plate separator, check valve)

* Under ordinary circumstances,

refrain from disassembling the air

of cleaner breather unit. Make sure

disassembling the air cleaner

breather unit only if necessary.

Step Parts to be removed Remarks and procedures Fasteners

Air Cleaner Plate

Air Cleaner

Cover

M5 Screw: 2pcs.

Plate

Choke Plate

Choke Lever

O Ring

Carburetor

Spacer

Breather Pipe

Return Pipe

Check Valve (A)

Check Valve

Plate

O Ring

Check Valve

Separator

Plate

Element

Insulator

Gasket Insulator

Gasket Carburetor

Carburetor

Insulator

Fig. 5-6

Return Pipe

Fig. 5-7

Fig. 5-8

Separator

Plate

Square pipe portion

Don't hold this portion.

Element

Air Cleaner

Plate

Step 2

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 47 48

Comments to this Manuals

No comments

Makita EM4251 Service Manual Page 16

Comments to this Manuals

Related products and manuals for Engine Makita EM4251