Makita EM4251 Service Manual Page 32

  • Download
  • Add to my manuals
  • Print
  • Page
    / 48
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 31
P 29 / 45
Screw M5
with washer : 3 pcs.
Rocker cover gasket
Rocker cover
Fig. 5 - 40
5 - 3 - 12 Rocker cover
Before installing rocker cover, apply oil on the sliding
surface of rocker arm and the like.
Fasten rocker cover with screw M5 x 16 (3 pcs.).
The tightening torque for
screw M5 x 16 : 4 -5.5 N.m
(40 - 55 Kg.cm)
(2.9 - 4.0 ft.lb.)
5 - 3 - 13 Pulley, Fuel tank and recoil starter
5 - 3 - 14 Muffler
and muffler gasket
Install pulley on crankshaft. Fasten pulley.
Install fuel tank on main bearing cover.
Install fuel recoil starter on crankcase.
Fasten recoil starter with screw M4 x 16
(2 pcs. lower side).
Install gasket, muffler and muffler cover on the
cylinder head exhaust port by fastening them
with socket head bolt M5 x 40 (2 pcs.)
and screw M5 x 5 (1 pc.).
The tightening torque
for pulley : 4 - 7 N.m
(40 - 70 Kg.cm)
(2.9 - 5.1 ft.lb.)
The tightening torque
for screw M4 x 16 : 1 - 2 N.m
(10 - 20 Kg.cm)
(0.7 - 1.4 ft.lb.)
Socket head
bolt M5 : 2 pcs.
Muffler gasket
Muffler
Plate
Plate
Damper
Fuel tank
Pulley
Recoil starter
Screw M5 : 2 pcs.
Screw M4
with washer : 2 pcs.
Fig. 5 - 41
Muffler cover
The tightening torque
Socket head bolt
M5 x 40
Screw M5 x 5
7 - 8.5 N.m
(70 - 85 Kg.cm)
(5.1 - 6.1 ft.lb.)
3 - 5 N.m
(30 - 50 Kg.cm)
(2.2 - 3.6 ft.lb.)
Page view 31
1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 47 48

Comments to this Manuals

No comments