Makita 9555NB User Manual download pdf (Page 4)

wheel immediately. Run the tool (with guard) at

no load for about a minute, holding tool away

from others. If wheel is flawed, it will likely sepa-

rate during this test.

7. Use only flanges specified for this tool.

8. Be careful not to damage the spindle, the flange

(especially the installing surface) or the lock nut.

Damage to these parts could result in wheel

breakage.

9. NEVER use tool with wood cutting blades or

other sawblades. Such blades when used on a

grinder frequently kick and cause loss of control

leading to personal injury.

10. Hold the tool firmly.

11. Keep hands away from rotating parts.

12. Make sure cord is clear of wheel. Do not wrap

cord around your arm or wrist. If control of tool

is lost, cord may become wrapped around you

and cause personal injury.

13. Make sure the wheel is not contacting the work-

piece before the switch is turned on.

14. Before using the tool on an actual workpiece, let

it run for a while. Watch for vibration or wobbling

that could indicate poor installation or a poorly

balanced wheel.

15. Use the specified surface of the wheel to per-

form the grinding.

16. Watch out for flying sparks. Hold the tool so that

sparks fly away from you and other persons or

flammable materials.

17. Do not leave the tool running. Operate the tool

only when hand-held.

18. Do not touch the workpiece immediately after

operation; it may be extremely hot and could

burn your skin.

19. ALWAYS wear proper apparel including long

sleeve shirts, leather gloves and shop aprons to

protect skin from contact with hot grindings.

20. Use of this tool to grind or sand some products,

paints and wood could expose user to dust con-

taining hazardous substances. Use appropriate

respiratory protection.

SAVE THESE INSTRUCTIONS

WARNING:

MISUSE or failure to follow the safety

rules stated in this instruction manual

may cause serious personal injury.

SYMBOLS

USD201-2

The followings show the symbols used for tool.

V ...........................volts

A........................... amperes

Hz .........................hertz

.................. alternating current

...................... no load speed

...................... Class II Construction

.../min ...................revolutions or reciprocation per

minute

FUNCTIONAL DESCRIPTION

CAUTION:

• Always be sure that the tool is switched off and

unplugged before adjusting or checking function on

the tool.

Shaft lock

CAUTION:

• Never actuate the shaft lock when the spindle is

moving. The tool may be damaged.

Press the shaft lock to prevent spindle rotation when

installing or removing accessories.

Switch action

CAUTION:

• Before plugging in the tool, always check to see

that the slide switch actuates properly and returns

to the “OFF” position when the rear of the slide

switch is depressed.

1. Shaft lock

1. Switch lever

005802

005803

1 2 3 4 5 ... 28

Comments to this Manuals

No comments

Makita 9555NB User Manual Page 4

Comments to this Manuals

Related products and manuals for Tools Makita 9555NB