Makita PV7001C User Manual download pdf (Page 7)

FUNCTIONAL

DESCRIPTION

CAUTION:

• Always be sure that the tool is switched off and

unplugged before adjusting or checking function on the

tool.

Switch action

CAUTION:

• Before plugging in the tool, always check to see that the

switch trigger actuates properly and returns to the “OFF”

position when released.

• Switch can be locked in “ON” position for ease of

operator comfort during extended use. Apply caution

when locking tool in “ON” position and maintain firm

grasp on tool.

To start the tool, simply pull the switch trigger. Release the

switch trigger to stop.

For continuous operation, pull the switch trigger and then

push in the lock button.

To stop the tool from the locked position, pull the switch trig-

ger fully, then release it.

Speed adjusting dial

The tool speed can be changed by turning the speed adjust-

ing dial to a given number setting from 1 to 5.

Higher speed is obtained when the dial is turned in the direc-

tion of number 5. And lower speed is obtained when it is

turned in the direction of number 1.

Refer to the table for the relationship between the number

settings on the dial and the approximate tool speed.

CAUTION:

• If the tool is operated continuously at low speeds for a

long time, the motor will get overloaded, resulting in tool

malfunction.

• The speed adjusting dial can be turned only as far as 5

and back to 1. Do not force it past 5 or 1, or the speed

adjusting function may no longer work.

The tools equipped with electronic function are easy to oper-

ate because of the following features.

1. Switch trigger

2. Lock button

003407

1. Speed adjusting dial

003408

Number

RPM (/min)

600

800

1,300

1,800

2,000

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

Comments to this Manuals

No comments

Makita PV7001C User Manual Page 7

Comments to this Manuals

Related products and manuals for Power tools Makita PV7001C