Makita 3700D Instruction Manual download pdf (Page 15)

Circle cutting base (Optional accessory)

Various diameter circles can be easily cut with the cordless trimmer by using the optional

circle cutting base.

Screw

attach the circle cutting base, you must

first remove the standard base. This

done

by removing the base clamp screw and

then removing the standard base from the

trimmer body. The circle cutting base

then installed, using the same clamp screw.

Be sure to tighten the clamp screw securely.

The circle cutting base

provided with

“T” shaped guide rod which should be in-

stalled by inserting the long part

the rod

through the hole in the base. Pivot the

short part of the rod to position “A” and

tighten the screw.

cut

circle, first adjust the bit protru-

sion for the desired depth

cut, and then

make

pilot hole

the center point

the

circle. Pivot the guide rod to position ”B”.

When using the straight bit

to make the

circle cut-out the thinner end of the rod

should point downward. When using the

straight bit

the thicker end of the rod

should point downward. Adjust the dis-

tance

(L)

between the rod and the bit for

the RADIUS

the desired circle you

intend to cut. Then tighten the screw

securely. Insert the end

the rod into the

pilot hole and turn on the trimmer. The

circle

can now be cut by pivoting the

trimmer around the pilot hole.

Blt

Thinner end

Screw

Thinner end

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 21 22 23

Comments to this Manuals

No comments

Makita 3700D Instruction Manual Page 15

Comments to this Manuals

Related products and manuals for Power tools Makita 3700D