Makita LS1016 Instruction Manual download pdf (Page 12)

To empty the dust box, open the cover by pushing the

button and dispose of the sawdust. Return the cover to

the original position and lock it in place. Dust box can

easily be removed by pulling it out while turning it near

the dust nozzle on the tool.

NOTE:

• If you connect a Makita vacuum cleaner to this tool,

cleaner operations can be performed.

NOTICE:

• Empty the dust box before collected sawdust level

reaches the cylinder section.

010592

010591

Securing workpiece

WARNING:

• It is extremely important to always secure the

workpiece correctly with the proper type of

vise or crown molding stoppers. Failure to do so

may result in serious personal injury and cause

damage to the tool and/or the workpiece.

• After a cutting operation do not raise the blade

until it has come to a complete stop. The raising

of a coasting blade may result in serious personal

injury and damage to the workpiece.

• When cutting a workpiece that is longer than

the support base of the saw, the material

should be supported the entire length beyond

the support base and at the same height to

keep the material level. Proper workpiece support

will help avoid blade pinch and possible kickback

which may result in serious personal injury. Do not

rely solely on the vertical vise and/or horizontal vise

to secure the workpiece. Thin material tends to sag.

Support workpiece over its entire length to avoid

blade pinch and possible KICKBACK.

001549

Guide fence (SLIDING FENCES which are

upper and lower fences) adjustment

WARNING:

• Before operating the tool, make sure that the upper

and lower fences are secured firmly.

• Before bevel-cutting, make sure that no part of

the tool, especially the blade, contacts the

upper and lower fences when fully lowering

and raising the handle in any position and

while moving the carriage through its full range

of travel. If the tool or blade makes contact with the

fence this may result in kickback or unexpected

movement of the material and serious personal

injury.

009508

The lower fences can be moved inward and outward by

loosening the clamping screws.

010594

A red indicating area will appear as the lower fences are

moved inward and will disappear as the lower fences are

moved outward.

The upper fences can be removed or moved inward and

outward by loosening the levers.

1. Upper fence

2. Lower fence

3. Red indicating

area

1. Levers

2. Clamping

screws

1. Support

2. Turn base

1. Cylinder section

2. Dust box

1. Cylinder section

2. Dust box

3. Sawdust

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 75 76

Comments to this Manuals

No comments

Makita LS1016 Instruction Manual Page 12

Comments to this Manuals

Related products and manuals for Circular saws Makita LS1016