Makita HR2610 Instruction Manual download pdf (Page 2)

ENGLISH (Original instructions)

SPECIFICATIONS

Model HR2300

HR2310T

HR2600 HR2601 HR2610

HR2610T HR2611F

HR2611FT

Concrete 23 mm 26 mm

Core bit 68 mm 68 mm 68 mm

Diamond core bit (dry type)

70 mm 80 mm 80 mm

Steel 13 mm 13 mm 13 mm

Capacities

Wood 32 mm 32 mm 32 mm

No load speed (min

-1

) 0 - 1,200

Blows per minute 0 - 4,600

Overall length 356 mm 380 mm 361 mm 385 mm 361 mm 385 mm

Net weight 2.7 kg 2.9 kg 2.8 kg 2.9 kg 2.8 kg 2.9 kg 2.9 kg 3.0 kg

Safety class /II

• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

END201-5

Symbols

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

･ Read instruction manual.

･ DOUBLE INSULATION

･ Only for EU countries

Do not dispose of electric equipment

together with household waste material!

In observance of European Directive

2002/96/EC on waste electric and

electronic equipment and its

implementation in accordance with

national law, electric equipment that

have reached the end of their life must

be collected separately and returned to

an environmentally compatible recycling

facility.

ENE042-1

Intended use

The tool is intended for hammer drilling and drilling in

brick, concrete and stone.

It is also suitable for drilling without impact in wood, metal,

ceramic and plastic.

ENF002-2

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and can

only be operated on single-phase AC supply. They are

double-insulated and can, therefore, also be used from

sockets without earth wire.

GEA005-3

General Power Tool Safety

Warnings

WARNING Read all safety warnings and all

instructions. Failure to follow the warnings and

instructions may result in electric shock, fire and/or

serious injury.

Save all warnings and

instructions for future reference.

The term "power tool" in the warnings refers to your

mains-operated (corded) power tool or battery-operated

(cordless) power tool.

Work area safety

1. Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

2. Do not operate power tools in explosive

atmospheres, such as in the presence of

flammable liquids, gases or dust. Power tools

create sparks which may ignite the dust or fumes.

3. Keep children and bystanders away while

operating a power tool. Distractions can cause

you to lose control.

Electrical safety

4. Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power

tools. Unmodified plugs and matching outlets will

reduce risk of electric shock.

5. Avoid body contact with earthed or grounded

surfaces such as pipes, radiators, ranges and

refrigerators. There is an increased risk of

electric shock if your body is earthed or grounded.

1 2 3 4 5 6 7 ... 11 12

Comments to this Manuals

No comments

Makita HR2610 Instruction Manual Page 2

Comments to this Manuals

Related products and manuals for Rotary hammers Makita HR2610