Rotary Hammer Capacities In wood In steel In concrete 18" 13" 20 mm (11116") (112") (314") I 20 mm (3/4") MODEL HRZOOO
ACCESSOR I ES CAUTION : These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of
Nov.-14-'91 EN Note: The switch, noise suppressor and other part configurations may differ from country to country. 11
KODEL HR2000 Jan -08-'92 US 1 2 3 4 5 6 7 8 11 12 13 14 15 16 17 18 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 1 1 1 1 1 1
SAFETY INSTRUCTIONS (For All Tools) WARNING: WHEN USING ELECTRIC TOOLS, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF
14. REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from tool before turning it on. 15.
VOLTAGE WARNING: Before connecting the tool to a power source (receptacle, outlet, etc.) be sure the voltage supplied is the same as that specified o
Bit grease Coat the bit shank head beforehand with a small amount (about 0.5- 1 g; 0.02-0.04'0z.) of bit grease. This chuck lubrication assure
Switch action Tool speed is increased by increasing pres- sure on the trigger. To start the tool, simply pull the trigger. Release the trigger to sto
Hammer drilling operation *Position the bit at the location for the hole, then pull the trigger. Do not force the tool. Light pressure gives
Secure the drill chuck in a vise or similar securing devise. Place the chuck key in one of the three holes so that the chuck body will no
MAINTENANCE CAUTION: Always be sure that the tool is switched off and unplugged before attempting to perform inspection or maintenance. Sharpening t
Comments to this Manuals