Makita HR2000 Instruction Manual download pdf (Page 6)

Switch action

Tool speed

increased by increasing pres-

sure on the trigger. To start the tool, simply

pull the trigger.

Release

the trigger to stop.

For continuous operation, pull the trigger

and then push in the lock button. To stop

the tool from the locked position, pull the

trigger fully, then release

it.

A speed con-

trol screw

provided

that maximum

tool speed can be limited (variable). Turn

the speed control screw clockwise for

higher speed, and counterclockwise for

lower speed.

Higher _Lower

Speed control screw

Lock button

CAUTION:

Before plugging in the tool, always check to

see

that the trigger switch actuates properly

and returns to the "OFF" position when released.

Reversing switch action

This tool has

reversing switch to change

the direction of rotation. Move the revers-

ing switch lever to the

position for

clockwise rotation or the

4%)

position for

counterclockwise.

CAUTION

*Always check the direction of rotation

before dril

ing.

*Use the reversing switch only when the

tool comes to

complete stop. Changing

the direction

rotation before the tool

stops may ruin the tool.

Torque limiter

The torque limiter will actuate when

certain torque level

reached. The motor will

disengage from the output shaft. When this happens, the bit will stop turning.

CAUTION

*As soon

the torque limiter actuates, switch

off

the tool immediately. This will help

prevent premature wear of the tool.

Hole saws, core bits, diamond core bits,

etc.

cannot be used with this tool. They tend

to pinch or catch easily in the hole. This will cause the torque limiter to actuate too

frequently

1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments

Makita HR2000 Instruction Manual Page 6

Comments to this Manuals

Related products and manuals for Power tools Makita HR2000