Makita BGA452 Instruction Manual download pdf (Page 2)

ENGLISH (Original instructions)

SPECIFICATIONS

Model BGA402 BGA450 BGA452

Wheel diameter 100 mm 115 mm

Spindle thread M10 M14

Rated speed (n) / No load speed (n

) 10000 (min

-1

)

Overall length 317 mm

Net weight 2.2 kg 2.2 kg 2.3 kg

Rated voltage D.C. 18V D.C. 14.4V D.C. 18V

• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.

• Specifications and battery cartridge may differ from country to country.

• Weight, with battery cartridge, according to EPTA-Procedure 01/2003

END221-2

Symbols

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

･ Read instruction manual.

･ Wear safety glasses.

･ Only for EU countries

Do not dispose of electric equipment or

battery pack together with household

waste material!

In observance of European Directive

2002/96/EC on waste electric and

electronic equipment, 2006/66/EC on

batteries and accumulators and waste

batteries and accumulators and their

implementation in accordance with

national laws, electric equipment and

battery pack that have reached the end

of their life must be collected separately

and returned to an environmentally

compatible recycling facility.

ENE048-1

Intended use

The tool is intended for grinding, sanding and cutting of

metal and stone materials without the use of water.

For Model BGA450

ENG104-2

Noise

The typical A-weighted noise level determined according

to EN60745:

Sound pressure level (L

) : 74 dB(A)

Uncertainty (K) : 3 dB(A)

The noise level under working may exceed 80 dB (A).

Wear ear protection.

ENG208-5

Vibration

The vibration total value (tri-axial vector sum) determined

according to EN60745:

Work mode : surface grinding

Vibration emission (a

h,AG

) : 8.5 m/s

Uncertainty (K) : 1.5 m/s

The declared vibration emission value has been

measured in accordance with the standard test method

and may be used for comparing one tool with another.

The declared vibration emission value may also be used

in a preliminary assessment of exposure.

The declared vibration emission value is used for main

applications of the power tool. However if the power tool

is used for other applications, the vibration emission

value may be different.

WARNING:

• The vibration emission during actual use of the

power tool can differ from the declared emission

value depending on the ways in which the tool is

used.

• Be sure to identify safety measures to protect the

operator that are based on an estimation of

exposure in the actual conditions of use (taking

account of all parts of the operating cycle such as

the times when the tool is switched off and when it

is running idle in addition to the trigger time).

ENG312-1

Work mode: disc sanding

Vibration emission (a

h,SG

) : 2.5 m/s

or less

Uncertainty (K) : 1.5 m/s

Ni-MH

Li-ion

1 2 3 4 5 6 7 ... 15 16

Comments to this Manuals

No comments

Makita BGA452 Instruction Manual Page 2

Comments to this Manuals

Related products and manuals for Power tools Makita BGA452