Makita AN453 User Manual download pdf (Page 8)

008401

Dry off the tool before use. Any oil film left after cleanup

will accelerate the tar buildup, and the tool will require

more frequent recleaning. After drying off the tool, oil the

moving parts to prevent rusting and to assure good

lubrication and operation or moving parts.

WARNING:

• Never use gasoline or other similar highly volatile

liquids for cleaning. Vapors of such liquids may

enter the tool and could be ignited by sparks

produced during nailing and cause an explosion.

Maintenance of nailer

Always check the tool for its overall condition and loose

screws before operation. Tighten as required.

008402

With tool disconnected, make daily inspection to assure

free movement of the contact element and trigger. Do

not use tool if the contact element or trigger sticks or

binds.

008409

When the tool is not to be used for an extended period of

time, lubricate the tool using pneumatic tool oil and store

the tool in a safe place. Avoid exposure to direct sunlight

and/or humid or hot environment.

008403

008404

Maintenance of compressor, air set and air

hose

004317

004318

After operation, always drain the compressor tank and

the air filter. If moisture is allowed to enter the tool, It

may result in poor performance and possible tool failure.

Check regularly to see if there is sufficient pneumatic oil

in the oiler of the air set. Failure to maintain sufficient

lubrication will cause O-rings to wear quickly.

1. Air filter

1. Drain cock

1. Brush

2. Ejection port

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 27 28

No comments

Makita AN453 User Manual Page 8