Makita AN453 User Manual download pdf (Page 5)

008389

FUNCTIONAL DESCRIPTION

CAUTION:

• Always disconnect the air hose before adjusting or

checking function on the tool.

Adjusting depth of nailing

008390

To adjust the depth of nailing, turn the adjuster. The

depth of nailing is the deepest when the adjuster is

turned fully in the A direction shown in the figure. It will

become shallower as the adjuster is turned in the B

direction. If nails cannot be driven deep enough even

when the adjuster is turned fully in the A direction,

increase the air pressure. If nails are driven too deep

even when the adjuster is turned fully in the B direction,

decrease the air pressure. Generally speaking, the tool

service life will be longer when the tool is used with

lower air pressure and the adjuster set to a lower depth

of nail driving.

CAUTION:

• Always disconnect the hose before adjusting the

depth of nailing.

Hook

008405

CAUTION:

• Always disconnect the hose from the tool.

• Never hook the tool at high location or on

potentially unstable surface.

The hook is convenient for hanging the tool temporarily.

Adjusting the shingle guide

008391

008392

The shingle guide is designed for consistent shingle

exposure. Place shingle in desired position.

Turn the lever clockwise to release the adjusting plate.

Reset the tool on the exposed shingle with the

projections of the contact element depressing the

bottom of the previous row of the shingle. Slide the

adjusting plate up against the bottom of the exposed

shingle and turn the lever counterclockwise to lock the

adjusting plate.

ASSEMBLY

CAUTION:

• Always disconnect the air hose before carrying out

any work on the tool.

1. Adjust plate

2. Lever

1. Contact element

2. Shingle guide

3. Shingle

4. Projection

1. Hook

1. Adjuster

1. Pneumatic tool

oil

1 2 3 4 5 6 7 8 9 10 ... 27 28

Comments to this Manuals

No comments

Makita AN453 User Manual Page 5

Comments to this Manuals

Related products and manuals for Nail Gun Makita AN453