Makita AN901 Specifications

INSTRUCTION MANUALWARNING:For your personal safety, READ and UNDERSTAND before using.SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.ENGLISHConstruction

10MAINTENANCECAUTION:• Always disconnect the hose before attempting to perform inspection ormaintenance.Maintenance of nailerAlways check the tool for

11When the tool is not to be used for an extended period of time, lubricate thetool using pneumatic tool oil and store the tool in a safe place. Avoid

12Keep the air hose away from heat (over 60°C, over 140°F), away from chemi-cals (thinner, strong acids or alkalis). Also, route the hose away from ob

Memo13

Memo14

Memo15

Makita Corporation884286A228

2SPECIFICATIONS• Due to our continuing programme of research and development, the specifications herein are subject to changewithout notice. • Note: S

3IMPORTANT SAFETY INSTRUCTIONS ENB067-2WARNING:WHEN USING THIS TOOL, BASIC SAFETY PRECAUTIONS SHOULD ALWAYSBE FOLLOWED TO REDUCE THE RISK OF PERSONAL

4• Check walls, ceilings, floors, roofing and the likecarefully to avoid possible electrical shock, gasleakage, explosions, etc. caused by striking li

5INSTALLATIONSelecting compressorThe air compressor must comply with the requirements of EN60335-2-34. Select a compressor that has ample pressure and

6FUNCTIONAL DESCRIPTIONCAUTION:• Always lock the trigger and disconnect the hose before adjusting orchecking function on the tool.Nose adapterWhen nai

7ASSEMBLYCAUTION:• Always lock the trigger and disconnect the hose before carrying out anywork on the tool.Loading nailerSelect nails suitable for you

8Connecting air hoseLock the trigger. Slip the air socket of the air hose onto the air fitting on thenailer. Be sure that the air socket locks firmly

9Jammed nailerCAUTION:• Always lock the trigger, disconnect the hose and remove the nails fromthe magazine before cleaning a jam.When the nailer becom