INSTRUCTION MANUALWARNING:For your personal safety, READ and UNDERSTAND before using.SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.ENGLISHPneumatic Fra
10Nails• Handle nail strips and their box carefully. If the nail strips have beenhandled roughly, they may be out of shape or the
11• Make sure that the trigger is locked when the change lever is set to theLOCK position.• When the tool is not to be used for an extended period of
12• Check regularly to see if there is sufficient pneumatic oil in the oiler of theair set. Failure to maintain sufficient lubrication will cause O-ri
Memo13
Memo14
Memo15
Makita Corporation884238A976
2SPECIFICATIONS•Due to our continuing programme of research and development, the specifications herein are subject to changewithout notice. •Note: Spe
3IMPORTANT SAFETY INSTRUCTIONS ENB087-1WARNING:WHEN USING THIS TOOL, BASIC SAFETY PRECAUTIONS SHOULD ALWAYSBE FOLLOWED TO REDUCE THE RISK OF PERSONAL
4• Always check the tool for its overall conditionand loose screws before operation. Tighten asrequired.• Make sure all safety system
5INSTALLATIONSelecting compressor• Select a compressor that has ample pressure and air output to assurecost-efficient operation. The graph sho
6• When an air set is not used, oil the tool with pneumatic tool oil by placing2 (two) or 3 (three) drops into the air fitting. This should be done be
7• To adjust the depth of nailing, turn the adjuster so that the arrow abovethe adjuster will point to the number indicated on the adjuster. The depth
8• Depress the nail stopper and remove the strip of nails from themagazine.Connecting air hose• Lock the trigger. Slip the air socket of th
9• For No. 1 method, set the change lever to the “Intermittent Nailing”position. For No. 2 method, set the change lever to the “
Comments to this Manuals