Makita LS711D Specifications download pdf (Page 8)

INSTALLATION

Bench mounting

When the tool is shipped, the handle is locked in the lowered

position by the stopper pin. Release the stopper pin by lower-

ing the handle slightly and pulling the stopper pin.

This tool should be bolted with two bolts to a level and stable

surface using the bolt holes provided in the tool’s base. This

will help prevent tipping and possible injury.

FUNCTIONAL

DESCRIPTION

CAUTION:

• Always be sure that the tool is switched off and the

battery cartridge is removed before adjusting or

checking function on the tool.

Installing or removing battery cartridge

• Always switch off the tool before insertion or removal of

the battery cartridge.

• To remove the battery cartridge, withdraw it from the tool

while pressing the buttons on both sides of the cartridge.

• To insert the battery cartridge, align the tongue on the

battery cartridge with the groove in the housing and slip

it into place. Always insert it all the way until it locks in

place with a little click. If not, it may accidentally fall out

of the tool, causing injury to you or someone around you.

• Do not use force when inserting the battery cartridge. If

the cartridge does not slide in easily, it is not being

inserted correctly.

1. Stopper Pin

002193

1. Bolt

002194

1. Battery cartridge

2. Button

002240

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 35 36

No comments

Makita LS711D Specifications Page 8