Makita LS711D Specifications download pdf (Page 17)

Dust bag

The use of the dust bag makes cutting operations clean and

dust collection easy. To attach the dust bag, fit it onto the

dust nozzle.

When the dust bag is about half full, remove the dust bag

from the tool and pull the fastener out. Empty the dust bag of

its contents, tapping it lightly so as to remove particles adher-

ing to the insides which might hamper further collection.

NOTE:

If you connect a Makita vacuum cleaner to your saw, more

efficient and cleaner operations can be performed.

Securing workpiece

WARNING:

• It is extremely important to always secure the workpiece

properly and tightly with the vise. Failure to do so can

cause the tool to be damaged and/or the workpiece to

be destroyed. PERSONAL INJURY MAY ALSO

RESULT. Also, after a cutting operation, DO NOT raise

the blade until the blade has come to a complete stop.

CAUTION:

• When cutting long workpieces, use supports that are as

high as the top surface level of the turn base. Do not rely

solely on the vertical vise and/or horizontal vise to

secure the workpiece.

Thin material tends to sag. Support workpiece over its

entire length to avoid blade pinch and possible

KICKBACK.

1. Dust nozzle

2. Fastener

3. Dust bag

002217

1. Support

2. Turn base

1 2

001549

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 35 36

No comments

Makita LS711D Specifications Page 17