Makita LS1013L Instruction Manual download pdf (Page 8)

CAUTION:

• When tilting the saw blade, be sure to raise the

handle fully.

• After changing the bevel angle, always secure the

arm by tightening the lever clockwise.

• When changing bevel angles, be sure to position

the kerf boards appropriately as explained in the

"Positioning kerf boards" section.

Switch action

CAUTION:

• Before plugging in the tool, always check to see

that the switch trigger actuates properly and

returns to the "OFF" position when released.

• When not using the tool, remove the lock-off button

and store it in a secure place. This prevents

unauthorized operation.

• Do not pull the switch trigger hard without pressing

in the lock-off button. This can cause switch

breakage.

For European countries

005228

To prevent the switch trigger from being accidentally

pulled, a lock-off button is provided. To start the tool,

push the lever to the left, press in the lock-off button and

then pull the switch trigger. Release the switch trigger to

stop.

For all countries other than European countries

001551

To prevent the switch trigger from being accidentally

pulled, a lock-off button is provided. To start the tool,

press in the lock-off button and pull the switch trigger.

Release the switch trigger to stop.

WARNING:

• NEVER use tool without a fully operative switch

trigger. Any tool with an inoperative switch is

HIGHLY DANGEROUS and must be repaired

before further usage.

• For your safety, this tool is equipped with a lock-off

button which prevents the tool from unintended

starting. NEVER use the tool if it runs when you

simply pull the switch trigger without pressing the

lock-off button. Return tool to a Makita service

center for proper repairs BEFORE further usage.

• NEVER tape down or defeat purpose and function

of lock-off button.

Lighting up the lamps

For Model LS1013F,LS1013FL only

002026

CAUTION:

• This is not a rainproof light. Do not wash the light in

water or use it in a rain or a wet area. Such a

conduct can cause an electric shock and fume.

• Do not touch the lens of the light, as it is very hot

while it is lighted or shortly after it is turned off. This

may cause a burn to a human body.

• Do not apply impact to the light, which may cause

damage or shorted service time to it.

• Do not keep casting the beam of the light to your

eyes. This can cause your eyes to be hurt.

• Do not cover the light with clothes, carton,

cardboard or similar objects while it is lighted,

which can cause a fire or an ignition.

Push the upper position of the switch for turning on the

light and the lower position for off.

003826

Move the light to shift an area of lighting.

1. Light switch

1. Light

2. Light switch

1. Lock-off button

2. Handle

3. Switch trigger

1. Lock-off button

2. Switch trigger

3. Lever

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 23 24

Comments to this Manuals

No comments

Makita LS1013L Instruction Manual Page 8

Comments to this Manuals

Related products and manuals for Mitre saws Makita LS1013L