Makita LS1013L Instruction Manual download pdf (Page 3)

Standard and can, therefore, also be used from sockets

without earth wire.

ENG102-3

Noise

The typical A-weighted noise level determined according

to EN61029:

Sound pressure level (L

) : 88 dB(A)

Sound power level (L

) : 101 dB(A)

Uncertainty (K) : 3 dB(A)

Wear ear protection

ENG238-1

Vibration

The vibration emission value determined according to

EN61029 :

Vibration emission (a

) : 2.5 m/s

or less

Uncertainty (K) : 1.5 m/s

ENH003-11

For European countries only

EC Declaration of Conformity

We Makita Corporation as the responsible

manufacturer declare that the following Makita

machine(s):

Designation of Machine:

Slide Compound Saw

Model No./ Type: LS1013, LS1013F,

LS1013L,LS1013FL

are of series production and

Conforms to the following European Directives:

98/37/EC until 28th December 2009 and then with

2006/42/EC from 29th December 2009

And are manufactured in accordance with the following

standards or standardised documents:

EN61029

The technical documentation is kept by our authorised

representative in Europe who is:

Makita International Europe Ltd,

Michigan, Drive, Tongwell,

Milton Keynes, MK15 8JD, England

30th January 2009

000230

Tomoyasu Kato

Director

Makita Corporation

3-11-8, Sumiyoshi-cho,

Anjo, Aichi, JAPAN

ENA001-2

SAFETY INSTRUCTIONS

WARNING! When using electric tools, basic safety

precautions, including the following, should always

be followed to reduce the risk of fire, electric shock

and personal injury. Read all these instructions

before operating this product and save these

instructions.

For safe operations:

1. Keep work area clean.

Cluttered areas and benches invite injuries.

2. Consider work area environment.

Do not expose power tools to rain. Do not use

power tools in damp or wet locations. Keep work

area well lit. Do not use power tools where there is

risk to cause fire or explosion.

3. Guard against electric shock.

Avoid body contact with earthed or grounded

surfaces (e.g. pipes, radiators, ranges,

refrigerators).

4. Keep children away.

Do not let visitors touch the tool or extension cord.

All visitors should be kept away from work area.

5. Store idle tools.

When not in use, tools should be stored in a dry,

high or locked up place, out of reach of children.

6. Do not force the tool.

It will do the job better and safer at the rate for

which it was intended.

7. Use the right tool.

Do not force small tools or attachments to do the

job of a heavy duty tool. Do not use tools for

purposes not intended; for example, do not use

circular saws to cut tree limbs or logs.

8. Dress properly.

Do not wear loose clothing or jewellery, they can

be caught in moving parts. Rubber gloves and

non-skid footwear are recommended when

working outdoors. Wear protecting hair covering

to contain long hair.

9. Use safety glasses and hearing protection.

Also use face or dust mask if the cutting operation

is dusty.

10. Connect dust extraction equipment.

If devices are provided for the connection of dust

extraction and collection facilities ensure these

are connected and properly used.

11. Do not abuse the cord.

Never carry the tool by the cord or yank it to

disconnect it from the socket. Keep the cord away

from heat, oil and sharp edges.

12. Secure work.

Use clamps or a vice to hold the work. It is safer

than using your hand and it frees both hands to

1 2 3 4 5 6 7 8 ... 23 24

Comments to this Manuals

No comments

Makita LS1013L Instruction Manual Page 3

Comments to this Manuals

Related products and manuals for Mitre saws Makita LS1013L