Makita RT0700C Instruction Manual download pdf (Page 9)

001998

When cutting, move the tool with the guide roller riding

the side of the workpiece.

Tilt base (optional accessory)

Tilt base (optional accessory) is convenient for

chamfering.

011993

Place the tool onto the tilt base and close the locking

lever at the desired protrusion of the bit. For desired

angle, tighten the clamping screws on its sides.

Firmly clamp a straight board to the workpiece and use it

as a guide against the tilt base. Feed the tool in the

direction of the arrow.

Base protector removed from the tilt base (optional

accessory)

Mounting the base protector which has been removed

from the tilt base on the trimmer base allows the change

of the trimmer base from the round base to a square

base.

For another application, remove the base protector from

the tilt base by loosening and removing four screws.

011994

And then mount the base protector on the trimmer base.

Offset base (optional accessory)

012085

(1)

Offset base (optional accessory) is convenient

for work in a tight area such as a corner.

011858

Before installing the tool on the offset base, remove the

collet nut and collet cone by loosening the collet nut.

011985

1. Wrench

2. Pulley

3. Shaft lock

1. Pulley

2. Collet nut

3. Collet cone

1. Base protector

2. Screw

1. Clamping

screws

1. Workpiece

2. Bit

3. Guide roller

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 19 20

Comments to this Manuals

No comments

Makita RT0700C Instruction Manual Page 9

Comments to this Manuals

Related products and manuals for Grass trimmers Makita RT0700C