Makita BHR200SJE Instruction Manual download pdf (Page 7)

Electric brake

This tool is equipped with an electric brake. If the tool

consistently fails to quickly stop after switch trigger

release, have tool serviced at a Makita service center.

Reversing switch action

This tool has a reversing switch to change the direction of

rotation. Depress the reversing switch lever from the A

side for clockwise rotation or from the B side for counter-

clockwise rotation.

When the reversing switch lever is in the neutral position,

the switch trigger cannot be pulled.

CAUTION:

• Always check the direction of rotation before

operation.

• Use the reversing switch only after the tool comes

to a complete stop. Changing the direction of

rotation before the tool stops may damage the tool.

• When not operating the tool, always set the

reversing switch lever to the neutral position.

Selecting the action mode

Rotation with hammering

For drilling in concrete, masonry, etc., depress the lock

button and rotate the change lever so that the pointer

points to the symbol. Use a tungsten-carbide tipped

bit.

Rotation only

For drilling in wood, metal or plastic materials, depress

the lock button and rotate the change lever so that the

pointer points to the symbol. Use a twist drill bit or

wood bit.

Hammering only

For chipping, scaling or demolition operations, depress

the lock button and rotate the change lever so that the

pointer points to the symbol. Use a bull point, cold

chisel, scaling chisel, etc.

CAUTION:

• Do not rotate the change lever when the tool is

running. The tool will be damaged.

• To avoid rapid wear on the mode change

mechanism, be sure that the change lever is always

positively located in one of the three action mode

positions.

Torque limiter

The torque limiter will actuate when a certain torque level

is reached. The motor will disengage from the output

shaft. When this happens, the bit will stop turning.

CAUTION:

• As soon as the torque limiter actuates, switch off

the tool immediately. This will help prevent

premature wear of the tool.

1. Reversing

switch lever

1. Rotation with

hammering

2. Lock button

3. Pointer

4. Change lever

003113

003128

1. Rotation only

2. Pointer

1. Hammering only

2. Pointer

003131

003133

1 2 3 4 5 6 7 8 9 10 11 12 ... 35 36

Comments to this Manuals

No comments

Makita BHR200SJE Instruction Manual Page 7

Comments to this Manuals