Makita BHR200SJE Instruction Manual download pdf (Page 2)

ENGLISH

SPECIFICATIONS

• Due to our continuing programme of research and development, the specifications herein are subject to change

without notice.

• Note: Specifications may differ from country to country.

GENERAL SAFETY RULES

USA003-2

(FOR ALL BATTERY OPERATED TOOLS)

WARNING:

Read and understand all instructions.

Failure to follow all instructions listed below,

may result in electric shock, fire and/or

serious personal injury.

SAVE THESE INSTRUCTIONS

Work Area

1. Keep your work area clean and well lit. Cluttered

benches and dark areas invite accidents.

2. Do not operate power tools in explosive atmo-

spheres, such as in the presence of flammable

liquids, gases, or dust. Power tools create sparks

which may ignite the dust or fumes.

3. Keep bystanders, children, and visitors away

while operating a power tool. Distractions can

cause you to lose control.

Electrical Safety

4. A battery operated tool with integral batteries or

a separate battery pack must be recharged only

with the specified charger for the battery. A

charger that may be suitable for one type of battery

may create a risk of fire when used with another bat-

tery.

5. Use battery operated tool only with specifically

designated battery pack. Use of any other batter-

ies may create a risk of fire.

Personal Safety

6. Stay alert, watch what you are doing, and use

common sense when operating a power tool. Do

not use tool while tired or under the influence of

drugs, alcohol, or medication. A moment of inat-

tention while operating power tools may result in

serious personal injury.

7. Dress properly. Do not wear loose clothing or

jewelry. Contain long hair. Keep your hair, cloth-

ing, and gloves away from moving parts. Loose

clothes, jewelry, or long hair can be caught in mov-

ing parts.

8. Avoid accidental starting. Be sure switch is in

the locked or off position before inserting bat-

tery pack. Carrying tools with your finger on the

switch or inserting the battery pack into a tool with

the switch on invites accidents.

9. Remove adjusting keys or wrenches before turn-

ing the tool on. A wrench or a key that is left

attached to a rotating part of the tool may result in

personal injury.

Model BHR200

Capacities

Concrete 20 mm (3/4”)

Steel 13 mm (1/2”)

Wood 27 mm (1-1/16”)

No load speed (RPM) 0 - 1,100/min.

Blows per minute 0 - 4,700

Overall length 316 mm (12-7/16”)

Net weight 4.0 kg (8.8 lbs)

Battery Charger DC24SA DC24WA

Input A.C. only 50 Hz - 60 Hz

Output D.C. 7.2 V - 24 V

Battery Cartridge BH2420 BH2433 BH2420 BH2433

Voltage 24 V

Charging time 30 min. 60 min. 55 min. 90 min.

1 2 3 4 5 6 7 ... 35 36

Comments to this Manuals

No comments

Makita BHR200SJE Instruction Manual Page 2

Comments to this Manuals