Makita BHR200SJE Instruction Manual download pdf (Page 3)

10. Do not overreach. Keep proper footing and bal-

ance at all times. Proper footing and balance

enable better control of the tool in unexpected situa-

tions.

11. Use safety equipment. Always wear eye protec-

tion. Dust mask, non-skid safety shoes, hard hat, or

hearing protection must be used for appropriate con-

ditions.

Tool Use and Care

12. Use clamps or other practical way to secure and

support the workpiece to a stable platform. Hold-

ing the work by hand or against your body is unsta-

ble and may lead to loss of control.

13. Do not force tool. Use the correct tool for your

application. The correct tool will do the job better

and safer at the rate for which it is designed.

14. Do not use tool if switch does not turn it on or

off. A tool that cannot be controlled with the switch is

dangerous and must be repaired.

15. Disconnect battery pack from tool or place the

switch in the locked or off position before mak-

ing any adjustments, changing accessories, or

storing the tool. Such preventive safety measures

reduce the risk of starting the tool accidentally.

16. Store idle tools out of reach of children and

other untrained persons. Tools are dangerous in

the hands of untrained users.

17. When battery pack is not in use, keep it away

from other metal objects like: paper clips, coins,

keys, nails, screws, or other small metal objects

that can make a connection from one terminal to

another. Shorting the battery terminals together

may cause sparks, burns, or a fire.

18. Maintain tools with care. Keep cutting tools

sharp and clean. Properly maintained tools with

sharp cutting edge are less likely to bind and are

easier to control.

19. Check for misalignment or binding of moving

parts, breakage of parts, and any other condition

that may affect the tool’s operation. If damaged,

have the tool serviced before using. Many acci-

dents are caused by poorly maintained tools.

20. Use only accessories that are recommended by

the manufacturer for your model. Accessories

that may be suitable for one tool may create a risk of

injury when used on another tool.

SERVICE

21. Tool service must be performed only by qualified

repair personnel. Service or maintenance per-

formed by unqualified personnel may result in a risk

of injury.

22. When servicing a tool, use only identical

replacement parts. Follow instructions in the

Maintenance section of this manual. Use of unau-

thorized parts or failure to follow Maintenance

instructions may create a risk of shock or injury.

SPECIFIC SAFETY RULES

USB028-2

DO NOT let comfort or familiarity with

product (gained from repeated use)

replace strict adherence to cordless

rotary hammer safety rules. If you use

this tool unsafely or incorrectly, you can

suffer serious personal injury.

1. Hold tool by insulated gripping surfaces when

performing an operation where the cutting tool

may contact hidden wiring. Contact with a “live”

wire will make exposed metal parts of the tool “live”

and shock the operator.

2. Wear ear protectors when using the tool for

extended periods. Prolonged exposure to high

intensity noise can cause hearing loss.

3. Be aware that this tool is always in an operating

condition, because it does not have to be

plugged into an electrical outlet.

4. Wear a hard hat (safety helmet), safety glasses

and/or face shield. Ordinary eye or sun glasses

are NOT safety glasses. It is also highly recom-

mended that you wear a dust mask and thickly

padded gloves.

5. Be sure the bit is secured in place before opera-

tion.

6. Under normal operation, the tool is designed to

produce vibration. The screws can come loose

easily, causing a breakdown or accident. Check

tightness of screws carefully before operation.

7. In cold weather or when the tool has not been

used for a long time, let the tool warm up for sev-

eral minutes by operating it under no load. This

will loosen up the lubrication. Without proper

warm-up, hammering operation is difficult.

8. Always be sure you have a firm footing.

9. Be sure no one is below when using the tool in

high locations.

10. Hold the tool firmly with both hands.

11. Keep hands away from moving parts.

12. Do not leave the tool running. Operate the tool

only when hand-held.

13. Do not point the tool at any one in the area when

operating. The bit could fly out and injure some-

one seriously.

14. Do not touch the bit or parts close to the bit

immediately after operation; they may be

extremely hot and could burn your skin.

15. Some material contains chemicals which may be

toxic. Take caution to prevent dust inhalation

and skin contact. Follow material supplier safety

data.

1 2 3 4 5 6 7 8 ... 35 36

Comments to this Manuals

No comments

Makita BHR200SJE Instruction Manual Page 3

Comments to this Manuals