Makita LS1030N Specifications download pdf (Page 9)

With the tool unplugged, rotate the blade by hand while hold-

ing the handle all the way down to be sure that the blade

does not contact any part of the lower base. Re-adjust

slightly, if necessary.

CAUTION:

• After installing a new blade, always be sure that the

blade does not contact any part of the lower base when

the handle is lowered completely. Always do this with the

tool unplugged.

Adjusting the miter angle

Loosen the grip by turning counterclockwise. Turn the turn

base while pressing down the lock lever. When you have

moved the grip to the position where the pointer points to the

desired angle on the miter scale, securely tighten the grip

clockwise.

CAUTION:

• When turning the turn base, be sure to raise the handle

fully.

• After changing the miter angle, always secure the turn

base by tightening the grip firmly.

Switch action

CAUTION:

• Before plugging in the tool, always check to see that the

switch trigger actuates properly and returns to the “OFF”

position when released.

• When not using the tool, remove the lock-off button and

store it in a secure place. This prevents unauthorized

operation.

• Do not pull the switch trigger hard without pressing in the

lock-off button. This can cause switch breakage.

To prevent the switch trigger from being accidentally pulled, a

lock-off button is provided. To start the tool, press in the lock-

off button and pull the switch trigger. Release the switch trig-

ger to stop.

1. Top surface ot turn base

2. Periphery of blade

3. Guide fence

001540

1. Pointer

2. Lock lever

3. Grip

4. Miter scale

001778

1. Lock-off button

2. Switch trigger

001862

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 23 24

Comments to this Manuals

No comments

Makita LS1030N Specifications Page 9

Comments to this Manuals

Related products and manuals for Circular saws Makita LS1030N