Makita XST01Z Use and Care Manual download pdf (Page 7)

Impact force grade

displayed on panel

Maximum blows

Application Work

Hard

Medium

Soft

Tightening when force

and speed are desired.

Tightening when a good

finishing is needed.

Tightening when excessive

tightening need to be avoided

because of potentially clogged

female screw and broken or

damaged screw head.

Tightening in underwork

material / Tightening long

screws.

2,700

(/min)

2,200

(/min)

1,400

(/min)

1,400

(/min)

T mode

Tightening when speed

and good finishing are

needed.

Tightening bolt up to M8.

Tightening sash screw/

Tightening small screws

such as M6.

Tightening bolt up to M8.

Tightening in the finishing

board, plaster board.

Tightening when speed

and good finishing are

needed.

015148

The impact force can be changed in four steps: hard,

medium, soft, and T mode.

This allows a tightening suitable to the work.

Every time the button

is pressed, the number of blows

changes in four steps.

For approximately one minute after releasing the switch

trigger, the impact force can be changed.

"T" is a special mode for fastening self drilling screws

and bolts. In this mode, the tool starts to drive a screw

with faster rotation, which is suited for drilling with the

self-drilling -screw tip. Once the tool starts to tighten the

screw, it impacts in soft force grade.

NOTE:

•

When all lamps on the switch panel go out, the tool

is turned off to save the battery power. The impact

force grade can be checked by pulling the switch

trigger to the extent that the tool does not operate.

• While pulling the switch trigger, the impact force

grade cannot be changed.

• The tool automatically stops to prevent the

damages on the parts during heavy load operation

with hard or medium impact force grade. In that

case select the soft or T mode impact force grade.

1 2 3 4 5 6 7 8 ... 32

Comments to this Manuals

No comments

Makita XST01Z Use and Care Manual Page 7

Comments to this Manuals

Related products and manuals for Power tools Makita XST01Z