Makita PJ7000 Instruction Manual

PJ7000 Plate JoinerIMPORTANT: Read Before Using. INSTRUCTION MANUAL 012251 DOUBLE INSULATION

10

11

12 Some dust created by power sanding, sawing, grinding, drilling, and otherconstruction activities contains chemicals known to the State of Californi

ENGLISH (Original instructions) SPECIFICATIONS Model PJ7000 100 mm x 4 mm x 22 mm Blade size Plate joiner blade (Outer dia. x Width x Arbor dia.) (4&

jewellery or long hair can be caught in moving parts. 16. If devices are provided for the connection of dust extraction and collection facilities, en

secured properly in place. 6. Make sure that the blade slides smoothly before operation. 7. Check the blades carefully for cracks or damage before o

down and rotate the knob until the pointer points to the desired scale graduation marked on the angle guide. Then tighten the lock lever up to secur

To start the tool, slide the slide switch toward the "I (ON)" position. For continuous operation, press the front of the slide switch to loc

012261 012263 T-Butt Joint (Fig. B) Fig. B 004585 012263 012262 Miter Joint (Fig. C) Fig. C 004586 012264 Frame Joint (Fig. D) Fi

004588 012263 To make joints, proceed as follows: 1. Fit the two workpieces together as they will appear in the finished joint position. 2. M

OPTIONAL ACCESSORIES CAUTION: • These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of