Makita BO6040 Instruction Manual

Random Orbit Sander Pad size 150 mm 16”) MODEL BO6040 Orbits per minute Overall length Net weight 1,600 - 5,800 316 mm (12-1/2”) 2.7 kg (5.9 Ibs) INST

Changing pad Makita offers an extensive range of optional super soft, soft and hard pads. Remove the screw counterclockwise from the center

OPERATION Sanding operation Turn the tool on and wait until it attains full speed. Then gently place the tool on the workpiece surface. Keep the

Removing wax Use an optional felt pad. Run the tool at low speed to remove wax. Polishing Use an optional wool pad. Run the tool at low speed and

ACCESSORIES CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other ac

31 76 32 14

Random Orbit Sander Part Description Item No. Descriotion 1 2 3 4 5 6 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 3

WARNING Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known [to the State

GENERAL SAFETY RULES USA0021 (For All Tools) WARNING! Read and understand all instructions. Failure to follow all instructions listed below, may resul

11. Avoid accidental starting. Be sure switch is off before plugging in. Carrying tools with your finger on the switch or plugging in tools that have

USBO40-2 Specific Safety Rules 1. Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiri

SYMBOLS The followings show the symbols used for tool. v ... volts A ...

FUNCTIONAL DESCRIPTION Switch action CAUTION: Before plugging in the tool, always check to see that the switch actuates properly and returns to the

Selecting action mode Use the change lever to change the rotation mode. Forcible rotation mode is orbital action plus rotation action of pad for rough

Typical applications for sanding and polishing Sanding Use / Material Paintwork: Sanding Repairs (scratches. rust stops) Rough paint stripping Plastic

ASSEMBLY Installing side grip (optional accessory) Remove one of the screws which secure the head cover. Screw the side grip on the tool securely.