Makita 4304T Instruction Manual download pdf (Page 6)

For

4305T

Press the button to raise the blade installing knob.

Rotate the blade installing knob in the

direction and the clamp on the blade holder

will open. Open the clamp

little

more than the thickness of the blade to be installed.

With the blade teeth facing forward, insert the blade into the blade holder

far

will go. Make sure that the back edge of the blade

fits

properly into the groove of the

roller.

With the blade held against the blade holder, rotate the blade installing knob in the

direction to tighten the clamp.

Position Cutting action

Blade installing knob

Button

Applications

Blade holder

Roller

Straight

line

cutting

action

With the blade installing knob kept in this position, push

back down to

its

original

NOTE

Occasionally lubricate the roller.

position.

For cutting mild steel, stainless steel and plastics.

For clean cuts in wood and plywood.

Selecting

the

cutting action

This tool can be operated with an orbital

straight line cutting action. To change

the cutting action, just turn the lever to the

desired cutting action position. Refer to

the table below to help determine the

appropriate cutting action.

Medium

orbit cutting

action

For cutting wood and plywood.

For fast cutting in aluminum and mild steel.

Small orbit cutting action

For cutting mild steel, aluminum and hard wood

111

Large orbit cutting action

For fast cutting

wood and plywood.

1 2 3 4 5 6 7 8 9 10 11 ... 19 20

Comments to this Manuals

No comments

Makita 4304T Instruction Manual Page 6

Comments to this Manuals

Related products and manuals for Power tools Makita 4304T