Makita 4304T Instruction Manual download pdf (Page 12)

MAINTENANCE

CAUTION:

Always be sure that the tool

switched off and unplugged before attempting to perform

inspection or maintenance.

Cleaning the

clamp

the

blade holder

If chips or foreign matter

get

into the clamp on the blade holder, clean out

the

clamp

after removing

from the blade holder. To remove the clamp, rotate the blade installing

lever (for 4304T) or knob (for 4305T) in the blade loosening direction

far

will go.

Then remove the clamp from the blade holder while rotating the clamp counterclock-

wise. To install the clamp, first make sure that the blade installing lever (for 4304T) or

knob (for 4305T) has been rotated in the blade loosening direction

far

possible.

Insert the clamp into the blade holder while rotating

clockwise one quarter to one full

turn. Grasp the clamp with your fingers

that

will not turn, then rotate the blade

installing lever or knob in the blade tightening direction

that the clamp will go into the

blade holder.

Blade holder

Clamp

To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or

adjustment should be performed

Makita Authorized or Factory Service Centers,

always using Makita replacement parts.

1 ... 11 12 13 14 15 16 17 18 19 20

No comments

Makita 4304T Instruction Manual Page 12