Makita DFR550 User Manual download pdf (Page 5)

ENGLISH (Original Instructions)

Explanation of general view

SPECIFICATIONS

• Due to our continuing program of research and development, the specifications herein are subject to change without

notice.

• Specifications and battery cartridge may differ from country to country.

• Weight, with battery cartridge, according to EPTA-Procedure 01/2003

Intended use

ENE033-1

The tool is intended for screw driving in wood, metal and

plastic.

General Power Tool Safety

Warnings GEA010-1

WARNING Read all safety warnings and all

instructions. Failure to follow the warnings and

instructions may result in electric shock, fire and/or

serious injury.

Save all warnings and

instructions for future reference.

CORDLESS SCREWDRIVER

SAFETY WARNINGS

GEB050-2

1. Hold power tool by insulated gripping surfaces,

when performing an operation where the fastener

may contact hidden wiring. Fasteners contacting a

“live” wire may make exposed metal parts of the

power tool “live” and could give the operator an

electric shock.

2. Always be sure you have a firm footing. Be sure

no one is below when using the tool in high

locations.

3. Hold the tool firmly.

4. Keep hands away from rotating parts.

5. Do not touch the bit or the workpiece immediately

after operation; they may be extremely hot and

could burn your skin.

SAVE THESE INSTRUCTIONS.

WARNING:

DO NOT let comfort or familiarity with product (gained

from repeated use) replace strict adherence to safety

rules for the subject product. MISUSE or failure to

follow the safety rules stated in this instruction

manual may cause serious personal injury.

IMPORTANT SAFETY

INSTRUCTIONS ENC007-7

FOR BATTERY CARTRIDGE

1. Before using battery cartridge, read all

instructions and cautionary markings on (1)

battery charger, (2) battery, and (3) product using

battery.

2. Do not disassemble battery cartridge.

3. If operating time has become excessively shorter,

stop operating immediately. It may result in a risk

of overheating, possible burns and even an

explosion.

4. If electrolyte gets into your eyes, rinse them out

with clear water and seek medical attention right

away. It may result in loss of your eyesight.

5. Do not short the battery cartridge:

(1) Do not touch the terminals with any

conductive material.

(2) Avoid storing battery cartridge in a container

with other metal objects such as nails, coins,

etc.

1. Red indicator

2. Button

3. Battery cartridge

4. Star marking

5. Lever

6. Stopper base

7. Label on feeder box

8. Fenestella

9. Casing

10. Adjusting knob

11. Switch trigger

12. Reversing switch lever

13. Thumb screw

14. Plane bearing

15. Dust cover

16. Bit

17. Feeder box

18. Screw strip

19. Screw guide

20. Driving position

21. Reverse button

22. Hook

23. Wall

24. Limit mark

25. Front cover

26. Screws

27. Spring

28. Arm

29. Recessed part

30. Carbon brush cap

31. Hole

Model DFR540 DFR550 DFR750

Screw strip 4 x 25 - 55 mm 4 x 45 - 75 mm

No load speed (min

-1

) 4,000

Overall length 424 m 464 mm

Net weight 2.0 kg 2.1 kg 2.1 kg

Rated voltage D.C. 14.4 V D.C. 18 V D.C. 18 V

1 2 3 4 5 6 ... 48

Comments to this Manuals

No comments

Makita DFR550 User Manual Page 5

Comments to this Manuals

Related products and manuals for Power screwdrivers Makita DFR550