Makita DCS 400DCS 401 Service Manual download pdf (Page 17)

Approved bar and chain combinations

"Low-kickback saw chain is a chain which has met the

kickback performance requirements of ANSI B 175.1-

1991 (American National Standard for Power Tools-

Gasoline-Powered Chain Saws-Safety Requirements)

when tested on the representative sample of chain

saws below 3.8. C.l.D. specifed in ANSI B 175.1-

1991". The approved bar and chain combinations are

low kickback chains according to ANSI B 175.1-1991

and also meet the kickback requirements of CSA

Z62.3-96 for chain saws below 80 cm

The chain saw DCS 340, DCS 341, DCS 400, DCS

401 has been approved with following guide bar

and chain combinations:

Guide bar 3/8" Saw chain 3/8"

length Part no. Part no.

12" (30 cm) 442 030 661 528 092 646

14" (35 cm) 442 035 661 528 092 652

16" (40 cm) 442 040 661 528 092 656

"There may be other replacement bar and chain

combinations available that also reduces the risk of

injury from kickback".

WARNING

Do not use other replacement bars and chains

unless they have been designated as meeting the

ANSI B 175.1-1991 (for USA) and CSA Z62.3-96

(for Canada) kickback performance requirements

on that specific powerhead, or has been desig-

nated as "low kickback" saw chain in accordance

with the ANSI B 175.1-1991 (for USA) and CSA

Z62.3-96 (for Canada) standard.

Technical data DCS 340 DCS 341 DCS 400 DCS 401

Single-cylinder two-stroke

Piston displacement 2.0 cu. in (33 cm

) 2.0 cu. in (33 cm

) 2.4 cu. in (39 cm

)

Cylinder bore 1.45" (37 mm) 1.45" (37 mm) 1.57" (40 mm) 1.57" (40 mm)

Piston stroke 1.22" (31 mm) 1.22" (31 mm) 1.22" (31 mm) 1.22" (31 mm)

Max. power at speed 1.4/9,000 kW/rpm 1.4/9,000 kW/rpm 1.7/9,000 kW/rpm 1.7/9,000 kW/rpm

Max. torque at speed 1.7/6,500 Nm/rpm 1.7/6,500 Nm/rpm 2.0/6,500 Nm/rpm 2.0/6,500 Nm/rpm

Idling speed 2,600 rpm 2,600 rpm 2,600 rpm 2,600 rpm

Ignition system

Electronic, without breaker

Spark plug NGK BPMR 6F NGK BPMR 6F NGK BPMR 6F NGK BPMR 6F

or Spark plug

CHAMPION RDJ-7Y CHAMPION RDJ-7Y CHAMPION RDJ-7Y CHAMPION RDJ-7Y

Electrode gap .020" (0.5 mm) .020" (0.5 mm) .020" (0.5 mm) .020" (0.5 mm)

Fuel system

Carburetor (for Canada) WALBRO WT 174 WALBRO WT 174 WALBRO WT 174 WALBRO WT 174

Carburetor (for USA) WALBRO WT 466 WALBRO WT 466 WALBRO WT 466 WALBRO WT 466

(all position diaphragm carburetor

with integral fuel pump)

Air filter Robkoflok Robkoflok Robkoflok Robkoflok

Fuel tank capacity 13.3 oz. (0.4 l) 13.3 oz. (0.4 l) 13.3 oz. (0.4 l) 13.3 oz. (0.4 l)

Fuel mixture see chapter "Fuel" see chapter "Fuel" see chapter "Fuel" see chapter "Fuel"

Weight

without cutting attachment 8 lbs. 9 oz. (3.9 kg) 8 lbs. 9 oz. (3.9 kg) 8 lbs. 13 oz. (4.0 kg) 8 lbs. 13 oz. (4.0 kg)

Cutting attachment

Guide bar sprocket nose bar sprocket nose bar sprocket nose bar sprocket nose bar

Cutting length 12" (30 cm) 12" (30 cm) 12" (30 cm) 12" (30 cm)

14" (35 cm) 14" (35 cm) 14" (35 cm) 14" (35 cm)

16" (40 cm) 16" (40 cm) 16" (40 cm) 16" (40 cm)

Safety saw chain (pitch) 3/8" (528 092 ...) (528 092 ...) (528 092 ...) (528 092 ...)

Drive link gauge .050" X X X X

Chain sprocket 6 teeth (028 223 310) (028 223 310) (028 223 310) (028 223 310)

Chain lubrication fully automatic oil fully automatic oil fully automatic oil fully automatic oil

pump pump pump pump

Oil tank capacity 7.1 oz. (0.21 l) 7.1 oz. (0.21 l) 7.1 oz. (0.21 l) 7.1 oz. (0.21 l)

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 29 30

Comments to this Manuals

No comments

Makita DCS 400DCS 401 Service Manual Page 17

Comments to this Manuals

Related products and manuals for Power chainsaws Makita DCS 400DCS 401