Makita DPC 6400 User Manual download pdf (Page 26)

General Entire Power Cut Clean exterior, check for damage. In case of damage,

have repaired by a qualified service centre immediately

Cutting disc Inspect regularly for damage and wear. 6

Clutch Have inspected at a service center.

Protection hood Clean 19

Before each start Cutting disc Inspect for damage and make sure the cutting wheel is 6

right for the job

V-belt Check V-belt tension 13

(note: tension gauge must be purchased separately)

Combination switch, Functional check

Safety locking button, Functional check

Throttle lever Functional check 15

Fuel tank cap Check for tightness

Every day Air filter Clean 19

Idle speed Check (cutting disc must not turn on idle) 17

Every week Fan housing Clean to ensure proper air cooling 11

Starter cable Check for damage 21

V-belt Check V-belt tension, inspect for damage and wear 18

Paper cartridge Clean 20

Spark plug Check and replace if necessary 20-21

Muffler Check tightness of mounting, clean spark arrester screen 11, 24

Every 3 months Suction head Replace 21

Fuel tank Clean

Storage Entire Power Cut Clean exterior, check for damage. In case of damage,

have repaired by a qualified service centre immediately

Cutting disc Remove and clean 12

Fuel tank Empty and clean

Carburetor Run empty

Page

Instructions for periodic maintenance

To ensure long life, prevent damage and ensure the full functioning of the safety features the following maintenance must be

performed regularly. Guarantee claims can be recognized only if this work is performed regularly and properly. Failure to perform

the prescribed maintenance work can lead to accidents! Users of the Power Cut must not perform any maintenance work not

described in this Instruction Manual. All such work must be carried out by a MAKITA service centre.

Service, spare parts and guarantee

Maintenance and repair

The maintenance and repair of modern cutoff saws and their safety-related components requires qualified technical training and a

workshop equipped with special tools and testing devices.

We therefore recommend that you consult a MAKITA service centre for all work not described in this instruction manual.

The MAKITA service centres have all the necessary equipment and skilled and experienced personnel, who can work out cost-effective

solutions and advise you in all matters.

Please contact your nearest service centre (list enclosed) or the general trading company or importer (see last page), who will gladly

provide you with the address of your nearest MAKITA service centre.

Spare parts

Reliable long-term operation, as well as the safety of your Power Cut, depend among other things on the quality of the spare parts used.

Use only original MAKITA parts, marked

Only original parts are from the same production line as the original unit and therefore ensure the highest possible quality of materials,

dimensions, functioning and safety.

Only original spare parts and accessories guarantee the highest quality in material, dimensions, functioning and safety.

Original spare parts and accessories can be obtained from your local dealer. He will also have the spare part lists to determine the

required spare part numbers, and will be constantly informed about the latest improvements and spare part innovations.

Please bear in mind that if parts other than original MAKITA spare parts are used, this will automatically invalidate the MAKITA product

guarantee.

We will furthermore not accept any liability damages arising from the use of non-MAKITA spare parts.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 85 86

Comments to this Manuals

No comments

Makita DPC 6400 User Manual Page 26

Comments to this Manuals

Related products and manuals for Petrol tool Makita DPC 6400