Makita DPC 6400 User Manual download pdf (Page 19)

STOP

NOTE: To install the cutting wheel see ”Mounting the cutting

wheel”.

Cleaning / changing the air filter

Turn the cover lock (11) to the ”Unlocked ” position and

carefully remove the filter cover (12).

There is an O-ring (G/15) between the filter cover (12) and

the air filter hood (G/14).

Unscrew the screws (13) and remove the air filter hood (14).

Clean the O-ring (15) with a brush and inspect for damage.

Remove the foam prefilter (17) from the filter cover.

Pull the paper cartridge (18) from the hood.

Remove the inner filter (16) from the intake opening.

Note:

Do not allow dirt to get into the carburetor!

Switch the combination switch to ”Choke” or cover the

carburetor with a clean cloth.

Cleaning the protection hood

Over time, the inside of the protective hood can become caked

with material residue (especially from wet cutting), which if

allowed to accumulate can hinder the free rotation of the

cutting disc. For this reason the hood must be cleaned out

from time to time.

Take off the cutting wheel with spring washer and remove

the accumulated material from inside the hood with a strip of

wood or similar implement.

Clean the shaft and all disassembled parts with a cloth.

STOP

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 85 86

No comments

Makita DPC 6400 User Manual Page 19