Makita RZ 100 Instruction Manual download pdf (Page 38)

Functions

Makita LD100P

FIN

SLO

RUS

EST

ROK

Press to stop continuous measurement (2). The

result is displayed in the summary line, the partial

results in the secondary line.

Indirect Measurement - determining a dis-

tance using 3 measurements

See figure {N}

Press this button twice; the display shows the

following symbol . The laser is switched on.

Aim at the upper point (1) and trigger the

measurement. After the first measurement the value

is adopted. Keep the instrument as horizontal as

possible

Press and hold down this button to trigger

continuous measurement, sweep the laser up and

down over the ideal target point.

Press to stop continuous measurement (2). The

value is adopted. Aim at the lower point and

press this button to trigger the measurement

(3). The result is displayed in the summary line, the

partial results in the secondary lines.

Indirect measurement - determining a chain

value using 3 measurements

See figure {O}

e.g. determining the height between point 1 and

point 2 using three target points.

Press this button three times ; the display

shows the following symbol . The laser is

switched on.

Aim at the upper point (1).

Press this button and trigger the measurement.

After the first measurement the value is adopted. The

display flashes (2).

Triggers the measurement. After the second

measurement the value is adopted. The display

flashes (3).

Press and hold down this button to trigger

continuous measurement. Sweep the laser up and

down over the ideal target point.

Press this button to end continuous measure-

ment. The result is displayed in the summary line, the

partial results in the secondary lines.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 409 410

Comments to this Manuals

No comments

Makita RZ 100 Instruction Manual Page 38

Comments to this Manuals

Related products and manuals for Networking Makita RZ 100