Makita SLIDE COMPOUND SAW LS1011N Specifications download pdf (Page 13)

To install the blade, mount it carefully onto the spindle, mak-

ing sure that the direction of the arrow on the surface of the

blade matches the direction of the arrow on the blade case.

Install the outer flange and hex bolt, and then use the socket

wrench to tighten the hex bolt (left-handed) securely counter-

clockwise while pressing the shaft lock.

Return the blade guard and center cover to its original posi-

tion. Then tighten the hex bolt clockwise to secure the center

cover. Lower the handle to make sure that the blade guard

moves properly. Make sure shaft lock has released spindle

before making cut.

Dust bag

The use of the dust bag makes cutting operations clean and

dust collection easy. To attach the dust bag, insert the elbow

into the dust spout on the blade case and fit the bag’s entry

port over the elbow.

When the dust bag is about half full, remove the dust bag

from the tool and pull the fastener out. Empty the dust bag of

its contents, tapping it lightly so as to remove particles adher-

ing to the insides which might hamper further collection.

NOTE:

If you connect a Makita vacuum cleaner to your saw, more

efficient and cleaner operations can be performed.

1. Hex bolt

2. Outer flange

3. Saw blade

4. Inner flange

5. Spindle

1. Blade case

2. Arrow

3. Saw blade

4. Arrow

12 4

001786

2 1 4 3

001787

1. Elbow

2. Dust bag

3. Fastener

002176

1 ... 12 13 14 ... 32

No comments

Makita SLIDE COMPOUND SAW LS1011N Specifications Page 13