Makita XSC01 Instruction Manual download pdf (Page 9)

MAINTENANCE

CAUTION:

• Always be sure that the tool is switched off and the

battery cartridge is removed before attempting to

perform inspection or maintenance.

• Clean out the upper and lower guards to ensure

there is no accumulated sawdust which may

impede the operation of the lower guarding

system. A dirty guarding system may limit the

proper operation which could result in serious

personal injury. The most effective way to

accomplish this cleaning is with compressed air. If

the dust is being blown out of the guards be

sure the proper eye and breathing protection is

used.

•

Never use gasoline, benzine, thinner, alcohol or the like.

Discoloration, deformation or cracks may result.

Inspecting blade

• Check the blade carefully for cracks or damage

before and after each use. Replace a cracked or

damaged blade immediately.

•

Continuing to use a dull blade may cause a dangerous

kickback and/or motor overload. Replace with a new

blade as soon as it no longer cuts effectively.

•

Blades for metal cutter cannot be re-sharpened.

Replacing carbon brushes

001145

Remove and check the carbon brushes regularly.

Replace when they wear down to the limit mark. Keep

the carbon brushes clean and free to slip in the holders.

Both carbon brushes should be replaced at the same

time. Use only identical carbon brushes.

007533

Use a screwdriver to remove the brush holder caps.

Take out the worn carbon brushes, insert the new ones

and secure the brush holder caps.

After replacing brushes, insert the battery cartridge into

the tool and break in brushes by running tool with no

load for about 1 minute. Then check the tool while

running and electric brake operation when releasing the

switch trigger. If electric brake is not working well, ask

your local Makita service center for repair.

To maintain product SAFETY and RELIABILITY, repairs,

any other maintenance or adjustment should be

performed by Makita Authorized or Factory Service

Centers, always using Makita replacement parts.

OPTIONAL ACCESSORIES

CAUTION:

• These accessories or attachments are

recommended for use with your Makita tool

specified in this manual. The use of any other

accessories or attachments might present a risk of

injury to persons. Only use accessory or

attachment for its stated purpose.

If you need any assistance for more details regarding

these accessories, ask your local Makita Service Center.

• Carbide-tipped blades

• Rip fence (Guide rule)

• Thumb screw M5 x 20

• Compression spring 6

• Hex wrench 5

• Safety goggle

• Makita genuine battery and charger

NOTE:

• Some items in the list may be included in the tool

package as standard accessories. They may differ

from country to country.

1. Brush holder

cap

2. Screwdriver

1. Limit mark

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 31 32

Comments to this Manuals

No comments

Makita XSC01 Instruction Manual Page 9

Comments to this Manuals

Related products and manuals for Circular saws Makita XSC01