Makita LF1000 User Manual download pdf (Page 5)

P 5 / 30

Repair

[3] DISASSEMBLY/ASSEMBLY

[3] -1. Handle Section

Fig. 4

Fig. 3

Fig. 5

DISASSEMBLING

The Handle section can be disassembled without separating Motor housing from Blade case.

Take the following steps:

1) Set the machine in the mode of miter saw. And lock the saw head unit at the lowest position by pushing Knob 20

as illustrated in Fig. 3.

2) Remove Handle cover by unscrewing two 4x25 Tapping screws and four 4x18 Tapping screws. (Fig. 4)

Now the inner parts of the Handle section can be replaced.

Note: Be careful not to lose Switch button (Lock off button) when removing Handle cover.

Knob 20

Push to lock the

saw head unit at

the lowest position.

Switch button

(Lock off button)

Handle cover complete

Tapping screw 4x25

Tapping screw 4x18

ASSEMBLING

1) Assemble Now lock-off mechanism to Handle by mounting first Compression spring 4, then Lock-off lever and

Switch button as illustrated in Fig. 5.

Note: Put Compression spring 4 securely in place. If not, the lock-off mechanism will not work properly.

2) Mount the inner parts (Switch, Brake switch, Line filter, etc). (Fig. 6)

Compression

spring 4

Lock-off lever

Switch button

Fig. 6

3) Install Switch lever on Handle by fitting the fulcrum boss on Switch lever securely in the switch lever installation hole

of Handle. (Fig. 7) And then do the reverse of disassembling steps.

Fig. 7

fulcrum boss

Switch lever

installation hole

Handle

Switch Brake switch

1 2 3 4 5 6 ... 30

No comments

Makita LF1000 User Manual Page 5